35 Whelen

I had trouble with those bullets sticking in my seating die, neck tension wasn't enough to overcome the bullets sticking in die. Got frustrated and gave up. How's your accuracy ?
 
I had trouble with those bullets sticking in my seating die, neck tension wasn't enough to overcome the bullets sticking in die. Got frustrated and gave up. How's your accuracy ?
I just loaded a few and got a velocity reading. I'm sure they'll be plenty accurate, I've shot the 220 Hammer and it shot half minute angle in my rifle
I bet those kill like lightning strikes
I'd bet the farm on it.
 
35 Whelen, Norma cases, Federal 215 primer, 67 grains of Power Pro Varmint, Hammer HHT 215 grain tipped, shot from 1885 Highwall, 28" barrel

3037.5 FPS
Yep! With the same bullet, RP Brass, 60gr of 8208 XBR I get 2950 fps with a 25in 1/12 barrel. But my favorite 35 Whelen load, 245gr Hammer Stone Hammer, 66.2 gr of Alliant 2000 MR at 2808 fps. If you have not tried Hammer bullets yet you need to.
 

Forum statistics

Threads
68,667
Messages
1,527,863
Members
155,981
Latest member
Bushcat001
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top