9.3x64 Brenneke

According to German law yes. The law of the importing Nation needs to be cross-checked too though.
Canada has similar law.

Primers and reloading powders are controlled items. (Can’t be shipped by regular carriers anyway, nor can you fligh with them in your luggage).

Brass is not and can be freely imported into Canada.

For loaded ammo there are restrictions (need a firearm licence and you are restricted to the number of rounds you can import at one time - 500 for rifle and 2,000 for shells if I remember correctly).
 
Last edited:
It is a shame, Bertram Brass have the 9.3X64B brass in stock but apparently it is not being exported.
Don't know if you coould get together and get some sent over.
9,3x64 is a russian sniper cartridge too!!!

HWL
 
I have long wondered why the 9.3x64 has not been the basis for many wildcats, other than the rebated rim.
Man, I did NOT know it had a rebated rim! That is almost enough to kill it.
 
I think the rebate is less than .010”. I’ll check and report back. Nothing at all like the 284 Winchester.
 
TypeRifle
Place of originWeimar Republic(Germany)
DesignerWilhelm Brenneke
Designed1927
Produced1927–present
Parent casenone
Case typeRimless, bottleneck
Bullet diameter9.30 mm (0.366 in)
Land diameter9.00 mm (0.354 in)
Neck diameter10.04 mm (0.395 in)
Shoulder diameter12.05 mm (0.474 in)
Base diameter12.88 mm (0.507 in)
Rim diameter12.60 mm (0.496 in)
Rim thickness1.30 mm (0.051 in)
Case length64.00 mm (2.520 in)
Overall length85.60 mm (3.370 in)
Case capacity5.71 cm3 (88.1 gr H2O)
Rifling twist360 mm (1-14.17 in)
Primer typeLarge rifle magnum
Maximum pressure440.00 MPa (63,817 psi)
[th width="298px"]
9.3×64mm Brenneke​
[/th]​
[td width="298px"]

9.3×64mm Brenneke FMJ cartridge
[/td]​
[th width="298px"]
Production history​
[/th]​
[th width="298px"]
Specifications​
[/th]​
 
I just checked 3 pieces of new HDS brass and the rim to base measurements were as follows:

1. .4945. To. .5035

2. .491. To. .503

3. .4915. To. .5035

Moral of the story is, the rebate might as well be non existent. But most importantly is that the more important dimension is the most consistent.
 
There were a few Wildcat cartridges based on the 9.3x64.

The 6.5x63 Messner Magnum, 8.5x63 Messner Magnum, .376 Steyr, .30 Hembrook Long, 8x64 Mazon, and I believe there was a .400, but I don't know the name
 
It seems Frankonia always has brass and ammo for sale.
For brass you need a German “connection”. I believe they can buy the brass only without a firearms licence and then ship it to you.

brass, bullets and primers need no firearms license in Germany
 
Blaser builds the occasional 9.3x64 barrel. They sell them over here occasionally, I don't know if a dealer is doing them or Blaser is making a special run available.

Bolt head should be the same as the 8x68S.

In the R93, the 9,3x64 and 375 H&H used the same magazine.
 

Forum statistics

Threads
67,349
Messages
1,495,031
Members
145,212
Latest member
ZeldaRiche
 

 

 

Latest profile posts

Trải nghiệm SKY88 với các trò chơi như casino trực tuyến, nổ hũ, game bài và tài xỉu. Nạp rút linh hoạt, tốc độ nhanh, giao diện mượt mà, đảm bảo an toàn và minh bạch.

Website: https://sky88.porn/
Email: sky88porn@gmail.com
Số điện thoại: 0885546789
Địa chỉ: 81 Đồng Đen, Phường 12, Bảy Hiền, Hồ Chí Minh, Việt Nam
channelkat wrote on NMAmateurHunter's profile.
FYI we need NM members! Please spread the word and join us if you can make it.
1775843806328.png
 
Top