Want To Sell Steyr 9.3x62mm

I handled on last week. You would have to spend a lot of money on a custom rifle for that fit and finish and smooth action.
 
I shoot 250 grain barnes tsx at 2700 fps in mine.

Less than 1 inch at 100 yards. Plan on shooting an Eland and a Sable with this load.

Considering it for Cape Buffalo on a one gun safari.
 
I shoot 250 grain barnes tsx at 2700 fps in mine.

Less than 1 inch at 100 yards. Plan on shooting an Eland and a Sable with this load.

Considering it for Cape Buffalo on a one gun safari.
Make sure it's legal. many places require .375 caliber or larger. That said, a 250 TSX should be enough for buffalo but is a little on the light side. I took a 1 shot kill on a buffalo with a 270 .375 but was a brass bullet. I'm sure as long as the shot is good you'll have no issues.

I assume this rifle is a push feed, correct?
 
Make sure it's legal. many places require .375 caliber or larger. That said, a 250 TSX should be enough for buffalo but is a little on the light side. I took a 1 shot kill on a buffalo with a 270 .375 but was a brass bullet. I'm sure as long as the shot is good you'll have no issues.

I assume this rifle is a push feed, correct?
Correct.
Super smooth action. The magazine has two depth insertion stages. 1st stage the bolt rides above the magazine without stripping a cartridge when you close the bolt. It allows you to drop one round in the action and load it.
Push it all the way in (2nd stage) and it loads from the magazine as any bolt action.
With the Safety is on you can push the bolt down and seats flat on the stock. Takes the Safety off and the bolt raises up at the normal angle to be grabbed and operated.
It’s really a smart design.
 
I have two 9.3x62s. A CZ550 Classic and a Steyr.

The Steyr is more accurate, puts every bullet weight into the same point of impact and has really good fiber optic iron sights.

It is super smooth, reliable and fast to operate.

I have the same Steyr series rifle in a lot of different cartridges.

I have no qualms about using it for Buffalo.

And yes, it is legal where I’m going, I already checked.
 
I have two 9.3x62s. A CZ550 Classic and a Steyr.

The Steyr is more accurate, puts every bullet weight into the same point of impact and has really good fiber optic iron sights.

It is super smooth, reliable and fast to operate.

I have the same Steyr series rifle in a lot of different cartridges.

I have no qualms about using it for Buffalo.

And yes, it is legal where I’m going, I already checked.
I love mine as well. I know they made a .458 win mag at one point, but I wish they’d made one in .458 Lott.
 

Forum statistics

Threads
63,443
Messages
1,395,707
Members
124,147
Latest member
DallasBenn
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top