BTP-KennethWRoyce
AH enthusiast
- Joined
- Aug 9, 2026
- Messages
- 454
- Reaction score
- 985
- Location
- USA Western Redoubt
- Media
- 1
- Hunted
- Tanzania, RSA, Texas, Colorado
But the "legal matters" are important. These are indeed ghastly photos and emotional testimonies. But one has to ask how is that Blaser is still in business if the weapon has a legitimate design flaw producing these sorts of injuries? One successful suite would likely crush Blaser. Where is that plaintiff who has proven product liability? If the design of this rifle rather than an obstruction or overload hurt anyone, I wish them every success in court. Facts, not forum posts, will matter in that venue. Until then, my own experience with Blaser ,and that of a fairly broad range of colleagues, is universally positive.
The firearm DEVA testing agency is a manufacturer's association co-owned by major German brands like Blaser, Heckler & Koch, Heym, Mauser, Merkel, Sauer, etc.The R93 has had some internet noise. I do know that Blaser has yet to be sued successfully for any product failure. Whether or not their has ever been a settlement, I have no way of knowing. I personally believe the R8 is the finest production rifle on the market. I own one in three calibers and have used it on everything from buff to duiker.
"Conflict of interest ", anybody?
To me, Blaser co-owning DEVA would be like Boeing co-owning the NTSB.
Or Goldman-Sachs co-owning Moody's Ratings.
I would expect that any plaintiff suing Blaser for his R93's catastrophic failure would have a very steep uphill battle. Take the case of one owner shooting factory Norma .30-06 ammo:
In July 2014, 69-year-old Christer Svensson experienced an accident where his R93 chambered for .30-06 Springfield exploded while loading his rifle on a shooting range near Bollnäs in Sweden, resulting in the bolt hitting his face. Svensson was using Norma factory ammunition. He turned in the rifle to Blaser, but wanted the Swedish National Forensic Centre to investigate the matter. However, he later agreed to the wish of Blaser and its Swedish distributors that all technical investigation would be performed by the German DEVA institute. The DEVA report concluded that the damages to the firearm almost certainly came from a combination of an overpressure and a problem with the casing of the cartridge. Svensson told the Swedish hunting and firearms magazine Svensk Jakt that he had difficulties getting his firearm back from the testing, and that it had been modified when he finally received it. He stated that the chamber and bolt head had been chopped off, and that the barrel did not have a stamped serial number anymore, and claimed the serial number appeared to have been reapplied by hand. He also claimed his rifle originally had a front sight mounted to it which was missing on the returned barrel.
The problem with the R93 accidents is not one of excess pressures, but of design. Blaser's argument has always been "Our rifles have been tested to pressures far in excess of even standard pressure proof loads". This is true.
What happens within the action in most instances of "Blown back in your face" is different.
Fact 1: There have been several accidents in which Blaser R93 bolts have blown back in the face of the shooter, with serious injuries as a consequence.
Shooters after accident:
...
What happens within the action in most instances of "Blown back in your face" is different.
Fact 1: There have been several accidents in which Blaser R93 bolts have blown back in the face of the shooter, with serious injuries as a consequence.
Shooters after accident:
...The main reinforcement of R8 compared to R93 is a conical part which is driven inside the collet and pushed it out on bolt close forcing the expansion from inside. It ensures that the collet has expanded at the most forward position of the bolt. If that conical piece is not retracted back by moving the bolt handle the collet physically cannot open. R93 didn't have that, when R93 collet was expanded there was an empty space inside it, so theoretically it could collapse.
Is Blaser R8 safer in the event of case failure?
If we look at the picture of the Blaser R8 action, the leaking gas can only go the way that is perpendicular to the action. It is safer than the traditional action, which letting the gas rushing toward the shooter.
www.canadiangunnutz.com
Talk without proof...... is just talk.....
Well, then, here's your meme.
I'd wager that the R93 bolt could have been redesigned with an R8-style internal sleeve to lock the collets in battery, and Blaser could have then recalled the old bolts. That'd have been the honorable solution. But, a recall would have implied design fault, and thus personal injury liability. Instead, Blaser left R93 owners stuck with an inferior model that can (apparently, if the ammo isn't just perfect) fail the user, and abandoned the R93 for the R8 (which won't accept R93 barrels).
Before I read this thread, I'd decided a few days ago that I wasn't going to buy a used Blaser R93.
(To all R93 owners keeping theirs, I strongly urge that you use only retail purchased factory ammo and keep the receipts. No handloads! And wear the best eye/face protection available.)
Furthermore, today I've decided not to buy anything from Blaser at all, even though I currently believe the R8 action is strong and safe. I became suspicious about Blaser's ethics regarding the 2014 Christer Svensson KB, but now I simply don't trust the company.
My thanks to the OP @PaulT, @Kano, @Norwegianwoods, and others who didn't duck this important safety issue. Respect!
