PRVI Blank Brass Cases

[Steve Steyr]

I was looking on the PRVI Partisan website and noticed they offer "Blank Brass Cases". Looking further, I discovered they offer:
.223/5.56 x 56mm blank brass, which could be used to form .222 Remington Magnum or 5.6x50.
7x64 x 67mm (.460" base diameter)
30-06 x 73mm which could be used to form .366 Sako/.370 Federal Magnum, or any of the Scovill calibers.
Also, among other others, .45 ACP, .303 British and 7.62x54 blank brass in longer lengths.
Does anyone have experience with this or has anyone tried any of this blank brass?

 

[Clayton]

Hmmm. Thanks for the post.

 

[Steve Steyr]

It tempts me to punch my CZ 550 Lux 9.3x62 out to 9.3x66. If I kept the same shoulder angle, I should be able to use my 9.3x62 dies.
Apparently, the 9.3x66 is close in power to the 9.3x64, which is the equal to the great .375 H&H. Gotta check the specs and ballistics to verify.

 

[Excessexpress]

I wonder if the blank 303 will be long enough to work as .375 x 2.5?

 

[Steve Steyr]

I forgot to note the length of the .303. It's on the PRVI website under "brass", I believe.