on a lighter note...

A is for After Burner.
Used mainly for highway speed to out run law enforcement "speed traps" , to speed past convoys of semi trucks, and around those nuisance slow drivers only doing 10 miles per hour over the posted speed limit in the "fast"/left lane. However, the A gear is not recommended for rural and in city use.

Seriously, although it looks like an "A" due to poor quality control stamping, it is really meant to be an "R" for reverse, for use to back the vehicle up.
No wrong R is for racing just like A but further down the alphabet :ROFLMAO: ;) Reverse who needs that just like brakes who needs em pifff
 
Middle of January and it's Mid 50s, sunny and clear. Whatever happened to winter?
Parked the truck about 40 minutes ago, the temp showing was 4*F. A skiff of snow so far, with another inch or two expected tonight, and a high of 2*F for tomorrow; Winter has arrived.
 
Over the past 800,000 years, there have been 8 glacial epochs on Earth, which were separated by periods of warming (interglacials) with an interval of 10 to 30 thousand years. The average interval between them is 100,000 years. We live in an interglacial period. And interestingly, the transition to the ice Age occurs very quickly, in a few years, and it is not known why.
 
Parked the truck about 40 minutes ago, the temp showing was 4*F. A skiff of snow so far, with another inch or two expected tonight, and a high of 2*F for tomorrow; Winter has arrived.
If you want to make the degree symbol - º - hold down the ALT key, then on the NUMERAL PAD (not the numerals above the qwerty row) press 167

<ALT> + 167
 
If you want to make the degree symbol - º - hold down the ALT key, then on the NUMERAL PAD (not the numerals above the qwerty row) press 167

<ALT> + 167
Thank you! Knew there was a way, but hadn't found it. Unfortunately, I'm usually using a laptop with no number pad, so the asterisk is as close as I can get, lol
 
Went and got my keyboard. Hot damn! The degree º symbol!

Now I just have to remember this...
 

If you're still alive.
I hope you have a speedy recovery.

Otherwise......

If any member knows of @Nyati 's funeral arrangements, please post so we may send our condolences.

This is proof that men need to take at least five minutes to think and analyze their thoughts and choices about their responses, and perhaps choose a better alternative response.
 
Middle of January and it's Mid 50s, sunny and clear. Whatever happened to winter?

November and December are conforming to political correct climate change. Winter is the new Spring. Spring is no longer a season. Spring has been assimilated into summer.

The former February 2nd "Groundhog's Day" is being moved to May 15th to allow at least 7 days warning before the "heat index" associated with summer.
 
Give some more eggnog to the snowplough drivers :A Stirring: :ROFLMAO:

Snowplows?.....Snowplows?
You are obviously not from the "back country" here in Tennessee.

Snowplows don't clean our roads of snow and ice until 3 days after the snow and ice is thawed and melted away off our roads by warm temps and/or "warm" rains.
 
No wrong R is for racing just like A but further down the alphabet :ROFLMAO: ;) Reverse who needs that just like brakes who needs em pifff

P: Passing Gear
R: Race Gear
N: Nitrous Gear
D: Drag Racing Gear
2: Lower Drag Racing Gear for take off
1: Used to Heat Up the Tires on take off
A: After Burner or Race Gear Engaging Turbo Charger
 
If you want to make the degree symbol - º - hold down the ALT key, then on the NUMERAL PAD (not the numerals above the qwerty row) press 167

<ALT> + 167

I just use the ° symbol on page 2 of my symbols page on my keyboard. :ROFLMAO::ROFLMAO::ROFLMAO:
 
°°°°° page 2 it is.
 

Forum statistics

Threads
65,556
Messages
1,447,181
Members
136,855
Latest member
PhoebeKess
 

 

 

Latest posts

Latest profile posts

Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
 
Top