Lightweight sporter

Bert Reynolds

AH veteran
Joined
May 30, 2019
Messages
132
Reaction score
139
My new lightweight sporter. 6.5-284. Built on a short action Montana 1999 with a McMillan edge stock and stainless walther barrel. Fully cerekoted in Midnight


IMG_7620.JPG
IMG_7619.JPG
IMG_7621.JPG
 
Last edited by a moderator:
mine is a kimber montana with a compact 2x7 leupold in . 257 roberts that weighs in a 6.2 lbs scoped, that shoots 3 into 3/4"-1" groups at 100 yards/.
 
Very nice -though the bolt handle seems to be on the wrong side. :cool:

I have always been a big 6.5 fan. Years ago I had a 6.5x57R in a drilling that took a lot of roe deer and even three or four red deer. Always hit way above its weight. I currently have a wee little 6.5x57 that has taken a number of whitetail, a 6.5x55 in a R8, and my newest set up - a .257 Wby in a R8. What velocity do you get from the short .280 case?
 
Very nice -though the bolt handle seems to be on the wrong side. :cool:

I have always been a big 6.5 fan. Years ago I had a 6.5x57R in a drilling that took a lot of roe deer and even three or four red deer. Always hit way above its weight. I currently have a wee little 6.5x57 that has taken a number of whitetail, a 6.5x55 in a R8, and my newest set up - a .257 Wby in a R8. What velocity do you get from the short .280 case?

6.5 is great. It’s no big surprise the creedmore is so popular. I just wanted something with a bit more horsepower or I would have went 6.5x55. I use small copper 113 grain. It shoots 1350fps.
 
mine is a kimber montana with a compact 2x7 leupold in . 257 roberts that weighs in a 6.2 lbs scoped, that shoots 3 into 3/4"-1" groups at 100 yards/.

Nice rifle. If I wasn’t a lefty this build would have a kimber action
 
Wow, fantastic!
Few rifles are both elegant and high tec...
Congratulations
Great action, barrel, caliber, optic...your rifle has it all!
 
Nice to see the bolt on the correct side for 10% of us. :A Shades:
 
6.5 is great. It’s no big surprise the creedmore is so popular. I just wanted something with a bit more horsepower or I would have went 6.5x55. I use small copper 113 grain. It shoots 1350fps.
1350?
 
My light weight rifle weighs in at 3.096kg…(6.8 lbs approx.) including sling, 5 rounds (150grain loads) and scope cover.
Rifle is a Sako 85 Finlight in an aftermarket carbon fibre stock. Kahles 4x fixed power scope, optilock rings. Ammunition used is Sako factory “super hammerhead “ 150 grain. Will constantly put 3 shots on around 3 inches at 200 yards, from a cold barrel, if I do my part.

A5A04B68-2EDB-4F57-99E4-0E82A4395507.jpeg
75021507-DCF7-4258-8DB8-6209970E7E20.jpeg
91359C1B-0F21-4174-A7CB-AD82C44DFDA6.jpeg
94CA84E0-160B-4803-8B8F-957F43D49145.jpeg
 
Last edited by a moderator:
My light weight rifle weighs in at 3.096kg…(6.8 lbs approx.) including sling, 5 rounds (150grain loads) and scope cover.
Rifle is a Sako 85 Finlight in an aftermarket carbon fibre stock. Kahles 4x fixed power scope, optilock rings. Ammunition used is Sako factory “super hammerhead “ 150 grain. Will constantly put 3 shots on around 3 inches at 200 yards, from a cold barrel, if I do my part.

Very nice. I always wanted a left hand finnlite, but they never made one in the configuration I liked. Is that a kiwi composites stock?
 
Very nice. I always wanted a left hand finnlite, but they never made one in the configuration I liked. Is that a kiwi composites stock?
Sure is. Hi Tec composite….pretty happy with it.
 
I took the sable in the photo of my avatar with a 6.5x284. the same trip i took nine other animals and all one shot kills.
 

Forum statistics

Threads
68,639
Messages
1,527,333
Members
155,704
Latest member
guiwasirli1975
 

 

 

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top