Lightweight sporter

Bert Reynolds

AH veteran
Joined
May 30, 2019
Messages
132
Reaction score
139
My new lightweight sporter. 6.5-284. Built on a short action Montana 1999 with a McMillan edge stock and stainless walther barrel. Fully cerekoted in Midnight


IMG_7620.JPG
IMG_7619.JPG
IMG_7621.JPG
 
Last edited by a moderator:
mine is a kimber montana with a compact 2x7 leupold in . 257 roberts that weighs in a 6.2 lbs scoped, that shoots 3 into 3/4"-1" groups at 100 yards/.
 
Very nice -though the bolt handle seems to be on the wrong side. :cool:

I have always been a big 6.5 fan. Years ago I had a 6.5x57R in a drilling that took a lot of roe deer and even three or four red deer. Always hit way above its weight. I currently have a wee little 6.5x57 that has taken a number of whitetail, a 6.5x55 in a R8, and my newest set up - a .257 Wby in a R8. What velocity do you get from the short .280 case?
 
Very nice -though the bolt handle seems to be on the wrong side. :cool:

I have always been a big 6.5 fan. Years ago I had a 6.5x57R in a drilling that took a lot of roe deer and even three or four red deer. Always hit way above its weight. I currently have a wee little 6.5x57 that has taken a number of whitetail, a 6.5x55 in a R8, and my newest set up - a .257 Wby in a R8. What velocity do you get from the short .280 case?

6.5 is great. It’s no big surprise the creedmore is so popular. I just wanted something with a bit more horsepower or I would have went 6.5x55. I use small copper 113 grain. It shoots 1350fps.
 
mine is a kimber montana with a compact 2x7 leupold in . 257 roberts that weighs in a 6.2 lbs scoped, that shoots 3 into 3/4"-1" groups at 100 yards/.

Nice rifle. If I wasn’t a lefty this build would have a kimber action
 
Wow, fantastic!
Few rifles are both elegant and high tec...
Congratulations
Great action, barrel, caliber, optic...your rifle has it all!
 
Nice to see the bolt on the correct side for 10% of us. :A Shades:
 
6.5 is great. It’s no big surprise the creedmore is so popular. I just wanted something with a bit more horsepower or I would have went 6.5x55. I use small copper 113 grain. It shoots 1350fps.
1350?
 
My light weight rifle weighs in at 3.096kg…(6.8 lbs approx.) including sling, 5 rounds (150grain loads) and scope cover.
Rifle is a Sako 85 Finlight in an aftermarket carbon fibre stock. Kahles 4x fixed power scope, optilock rings. Ammunition used is Sako factory “super hammerhead “ 150 grain. Will constantly put 3 shots on around 3 inches at 200 yards, from a cold barrel, if I do my part.

A5A04B68-2EDB-4F57-99E4-0E82A4395507.jpeg
75021507-DCF7-4258-8DB8-6209970E7E20.jpeg
91359C1B-0F21-4174-A7CB-AD82C44DFDA6.jpeg
94CA84E0-160B-4803-8B8F-957F43D49145.jpeg
 
Last edited by a moderator:
My light weight rifle weighs in at 3.096kg…(6.8 lbs approx.) including sling, 5 rounds (150grain loads) and scope cover.
Rifle is a Sako 85 Finlight in an aftermarket carbon fibre stock. Kahles 4x fixed power scope, optilock rings. Ammunition used is Sako factory “super hammerhead “ 150 grain. Will constantly put 3 shots on around 3 inches at 200 yards, from a cold barrel, if I do my part.

Very nice. I always wanted a left hand finnlite, but they never made one in the configuration I liked. Is that a kiwi composites stock?
 
I took the sable in the photo of my avatar with a 6.5x284. the same trip i took nine other animals and all one shot kills.
 

Forum statistics

Threads
64,222
Messages
1,414,758
Members
129,263
Latest member
JakeSoul59
 

 

 

Latest profile posts

Gary C wrote on HuntingFreak's profile.
Hey my friend, I am returning to SA for a Cape Buffalo hunt in June 26. My outfitter has suggested Highveld but I have read some poor reports. Wondering how satisfied you were with your mounts from them? Thanks in advance.
Finally back to somewhat normal I missed reading the messages and posts
Remember I will be at the ISE show in Denver Colorado for 8-12 January, and after the show I will be available for meetings anywhere in the USA I will traveling around to meet with old and new clients, let me know and we will set up a meeting!
Beautiful Aardwolf for our Spanish client and good friend Alberto
WhatsApp Image 2025-11-12 at 17.27.22 (2).jpeg
C-YA-L8R wrote on PaulB's profile.
Hi PaulB,
I have a Ballard Arms Model 1885 chambered for .333 Jeffery Flanged. Do you have any idea where I can get ammo for this?

I am new to this forum so I am sorry if I am doing something wrong!
Thank You!
Bruce D
Lakewood Village, California

BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (1).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (2).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (11).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (5).jpg
 
Top