Info on this Mauser?

MS ST39 50 Mannlicher Schoenauer.jpg


Page 50 of 1939 Stoeger catalog.

Notice how rounded grip is shown on stutzen (full stocked carbine) while flattened grip with horn cap is shown on 'High Velocity' and 'Take Down' models.

The stutzen image was actually outdated by then as the rounded grips are almost always found on earlier MS.

My M1910 Take Down Model has the flattened grip with removable grip cap for storage of spare sight bead as shown here:

MS Stock Grip Storage.jpg


It also has the 'Special folding peep sight' from the options list shown in Stoeger catalog:

MS ST39 51 Mannlicher Schoenauer details 02.jpg
 
My M1910 Mannlicher Schoenauer (9.5X57 - .375 Nitro Express Rimless) Take Down Model is rather light and 'barks' a bit but recoil has never bothered me when held tight to the shoulder.
By chance Brian have you ever weighed your Mannlicher? Just curios what a long barreled model weighs.
 
I would advise against buggering that steel buttplate or any of the engraving. If it were mine I would keep it as 'original' as possible, yet consider adapting claw mounts to the already altered scope mounts that are presently installed. Fill screw holes with screws, no welding.

[/QUOTE]

@Brian Rothhammer

I'm not advising buggering anything. Remove the butt plate, store in a safe place and install a pad that looked vintage and would allow it to be shot comfortably. That's just what I would do in order to enjoy shooting it. Of course a slip on is an option but even at the range they look like garbage.

The OP can do what he wants but I'm not man enough for a 6.5 lb 9mm rifle.
 
My M1910 Mannlicher Schoenauer (9.5X57 - .375 Nitro Express Rimless) Take Down Model is rather light and 'barks' a bit but recoil has never bothered me when held tight to the shoulder.
Ditto
 
By chance Brian have you ever weighed your Mannlicher? Just curios what a long barreled model weighs.
I just weighed my Stutzen in at 6lb, 11 oz, without scope. Not sure on the take down. Can't be that much more.

Oh, and my steel butt plate has yet to break my shoulder, and provides me rapid access to a handy place to store a cleaning rod and two extra rounds.
 
I grew up hunting deer with a shotgun and slugs so your 2 choices were don’t hunt deer which I simply couldn’t do, or learn to shot well and take the recoil. I got used to it and when going to rifles they were much gentler on the shoulder. Weapon tight to shoulder squeeze the trigger hit the target. Easy Peezy
 
Picked up this Mauser in a trade. Interesting piece. 9 MM Mauser. “Sights fitted by George Gibbs Bristol N35 Seville Row London” engraved on top of barrel, although the engraving is fading and worn. Drilled and tapped, of course, as well as an aftermarket Timney type safety. My smith had to add some metal to the cocking piece as well. Have not shot it but I have picked up 3 boxes of ammo. 6.6 pounds all in. Not a Mauser guy, wondering if I should have the engraving recut since it’s already D&T. Any market for this thing?View attachment 459683View attachment 459684View attachment 459685View attachment 459686View attachment 459687
Pity it’s no longer original. Stock has also been rechecked. A nice little gun nonetheless.
 
Yes very nice and more usable. Steel butt blade is no big deal. Like MS 9x 56 said....hold it tight to your shoulder. I had an 8 bore rifle at one time that had a steel butt plate and my shoulder managed to survive it.
 
By chance Brian have you ever weighed your Mannlicher? Just curios what a long barreled model weighs.

Just weighed her on a cheapie electronic postal scale (accuracy?).

Rifle is Mannlicher Schoenauer M1910 Take Down Model (60 cm barrel) with claw mounts, removable grip cap storage (one spare sight bead inside), 'special folding peep sight' (as described 1939 Stoeger, page 50), original steel trap door buttplate. Weighed with four piece cleaning rod in stock, magazine installed, without cartridges.

Without 'scope: 7 lbs, 0.7 oz. - 3.195 kg.

With 4X scope: 8 lbs, 1.8 oz. - 3.679 kg.

Gerard 'B' scope: 1 lb, 0.9 oz. - .48 kg.
 

Forum statistics

Threads
68,656
Messages
1,527,691
Members
155,849
Latest member
KeithDerha
 

 

 

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top