Forster Dies

Pheroze

AH ambassador
Joined
Jul 6, 2013
Messages
5,051
Reaction score
8,224
Location
Ontario
Media
96
Articles
25
Hunting reports
Africa
1
USA/Canada
6
Member of
OFAH, DSC
Hunted
South Africa, Canada, USA
Has anyone ever noticed a different in accuracy for hunting by switching from RCBS or Lee to one of the more expensive dies? These dies look interesting but wonder if the technology really makes a difference for hunting accuracy as opposed to competition.
 
I was given some Lee dies and I have never changed die manufacturers.
Accuracy has not been an issue.
 
  • Like
Reactions: lcq
I was given some Lee dies and I have never changed die manufacturers.
Accuracy has not been an issue.

I have Lee RCBS and Redding and frankly I can't tell the difference. I suppose if you are using a heavy benchrest gun it matters but not for a hunting rifle
 
Given the tolerances that the die manufactures use I doubt that there is a difference in any of the dies. Now there may be a difference in the bullet seating die or a crimp die but that is all that I can think of.
 
Lee, in his manual, is quite disparaging of the dies that promote a sleeve to reduce bullet run out. I do like the way the RCBS have a lock nut on the bullet seating die. Just a little added certainty.
 
I used to have RCBS dies for my Tikka T3 chambered in a 25-06. As most people will tell you the 25-06 is very fussy when it comes to grouping and i tried many things to get the calibre shooting accurate. I think the biggest performance jump i got was to use competition dies from forster instead of the normal dies from RCBS
 
I like the Forster competition dies. I think the main benefit of premium dies, in theory, would be reduced case run-out. But I've never tested this theory enough to have any conclusions.
 
In the past I've had trouble with RCBS Dies including supposedly custom made ones. I switched to Dillon & Redding and my problems went away. I have a set of Lee Dies for loading 35 Whelen on a press away from home. Recently I purchased a Hornady Concentricity Gage that will check and CORRECT bullet run-out. Minor bullet run-out may not effect hunting accuracy for short ranges, however hunting at longer ranges requires the most accurate bullet possible. IMO that means better dies coupled with concentricity checks. Improving your reloading technique by partially seating the bullet and then rotating the case to finish seating the bullet will reduce run-out issues. There is a book titled Practical Reloading by Nathan Foster a noted Long Range Hunter that is the most informative treatise on reloading I've ever read.
 
For general hunting rifles that you are happy with MOA then almost all of the dies will do that. That is all most hunters really need. If you are into competition or long range shooting beyond 600 yards then there may be some benefits. Match dies are usually made to tighter tolerances and as mentioned above can reduce runout. That is one factor that can help a 1 MOA rifle become a 1/2 MOA rifle. Bruce
 
Along those same lines, if wringing out ever last bit of accuracy is your huckleberry, I'd suggest using a Lee collet neck sizer instead of full length resizing. I had a drastic decrease in runout when I switched.
 
For a lot of years I've only neck sized every thing. On my hunting ammo I set the die to barely bump the shoulder. A mentor felt that it's a little insurance against feeding problems that could occur at the worst time. Must say I've never had that happen.

On my bench/varmint guns I do use Forster Seating Dies & recorded the setting for each weight & style bullet I use. That has made repeatability easier for me.

As always, this is just my $0.02 worth.
 
  • Like
Reactions: lcq

Forum statistics

Threads
54,174
Messages
1,147,719
Members
93,716
Latest member
MirandaU08
 

 

 

Latest profile posts

sgtsabai wrote on Tanks's profile.
Business is the only way to fly. I'm headed to SA August 25. I'm hoping that business isn't an arm and a leg. If you don't mind, what airline and the cost for your trip. Mine will be convoluted. I'll be flying into the states to pick up my 416 Rigby as Thailand doesn't allow firearms (pay no attention to the daily shootings and killings) so I'll have 2 very long trips.
Vonfergus wrote on JamesJ's profile.
I am interested in the Double
Nick BOWKER HUNTING SOUTH AFRICA wrote on EGS-HQ's profile.
Hi EGS

I read your thread with interest. Would you mind sending me that PDF? May I put it on my website?

Rob
85lc wrote on Douglas Johnson's profile.
Please send a list of books and prices.
 
Top