Continued load development

ozarkrambler

AH member
Joined
Feb 3, 2026
Messages
34
Reaction score
14
So, ive been trying to work up a load with h4895 and the 500 gr ceb solids in my 470ne. Tonight I got up to 76gr with foam wad, and my velocity was 1950fps. ( I started at 68 grs and that gave me 1740fps)

They are getting closer to center, but still 4 inches apart. My rifle regulates with federal factory 500gr swift ammo. Its velocity is running 2079.

My question is, can I keep going up in powder charge until I get to 2079 and see what it does? I've read, "on the internet," that I shouldn't go over 76 gr with the h4895. No reasons given but im a touch leery since there isn't much for load data out there with H4895. JJ told me 79 gr imr 3031 would be about the Federal velocity equivalent...for what thats worth.

Thanks in advance for any insight....
 
So, ive been trying to work up a load with h4895 and the 500 gr ceb solids in my 470ne. Tonight I got up to 76gr with foam wad, and my velocity was 1950fps. ( I started at 68 grs and that gave me 1740fps)

They are getting closer to center, but still 4 inches apart. My rifle regulates with federal factory 500gr swift ammo. Its velocity is running 2079.

My question is, can I keep going up in powder charge until I get to 2079 and see what it does? I've read, "on the internet," that I shouldn't go over 76 gr with the h4895. No reasons given but im a touch leery since there isn't much for load data out there with H4895. JJ told me 79 gr imr 3031 would be about the Federal velocity equivalent...for what thats worth.

Thanks in advance for any insight....
Move to IMR3031 and you will not be sorry you will easily hit your desired FPS at much less recoil
 
It looked like a lot of people were having luck with the rl 15.5 so I ordered some to try. I was only trying the 4895 because I had lots of it. I liked the temp stability of it better than the imr powder.
 

Forum statistics

Threads
68,581
Messages
1,525,732
Members
154,981
Latest member
GusCimitie
 

 

 

Latest profile posts

Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
I have not posted any items for sale on this forum and will not every put anything for sale. My account was hacked and I've worked with the admin to get things shut down.
 
Top