Ceiling height

jbirdwell

AH enthusiast
Joined
May 5, 2023
Messages
419
Reaction score
793
Location
Texas
Media
10
Hunting reports
Africa
1
Europe
1
Member of
NRA Benefactor Life Member, SCI Life Member, DSC
Hunted
US, South Africa
I know that you can not really do a Kudu with a shoulder mount but what about Sable or Nyala In a room with 8’ ceilings? I’m out of room for floor pedestals am I’m limited by my ceiling heights. Thanks for any input.
 
Here's mine with a 7 foot ceiling. The kudu and gemsbok are 6" off of the floor, since this picture was taken I added a blue Wildebeest a little higher just below the black one and a warthog at the top.

Little kids love it.

IMG_0939.JPG
 
Last edited by a moderator:
One option is a full sneak pose. I have an eastern cape kudu in this pose and is one of my favorite mounts.
 
  • Like
Reactions: WAB
A kudu shoulder mount can be done with 6.5 feet walls providing the head is angled slightly naturally forward.
20200831_190951.jpg


My other kudu the shoulder mount the head is a bit more of an alert position and at a slight (kudu's) right cant. I had to hang it lower on the wall and added a 1/2 inch plywood spacer to keep the right horn tip from touching the ceiling and wall the kudu was hung on.

I'm hoping the new trophy room with 9 feet walls and vaulted ceiling will allow for more room and space for my eland and Leche.

A sable with 8 feet walls should be doable with the head straight as if naturally walking.
 
Thanks guys for the pics and input
 
I’ll check them out and i was planning on possibly moving some whitetail mounts to a corner
 
Enjoy your mounts wherever you can hang them and when you build someday go with a 12’ minimum.
 

Forum statistics

Threads
68,622
Messages
1,526,868
Members
155,456
Latest member
AntonyPrie
 

 

 

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top