Ceiling height

jbirdwell

AH enthusiast
Joined
May 5, 2023
Messages
419
Reaction score
795
Location
Texas
Media
10
Hunting reports
Africa
1
Europe
1
Member of
NRA Benefactor Life Member, SCI Life Member, DSC
Hunted
US, South Africa
I know that you can not really do a Kudu with a shoulder mount but what about Sable or Nyala In a room with 8’ ceilings? I’m out of room for floor pedestals am I’m limited by my ceiling heights. Thanks for any input.
 
Here's mine with a 7 foot ceiling. The kudu and gemsbok are 6" off of the floor, since this picture was taken I added a blue Wildebeest a little higher just below the black one and a warthog at the top.

Little kids love it.

IMG_0939.JPG
 
Last edited by a moderator:
One option is a full sneak pose. I have an eastern cape kudu in this pose and is one of my favorite mounts.
 
  • Like
Reactions: WAB
A kudu shoulder mount can be done with 6.5 feet walls providing the head is angled slightly naturally forward.
20200831_190951.jpg


My other kudu the shoulder mount the head is a bit more of an alert position and at a slight (kudu's) right cant. I had to hang it lower on the wall and added a 1/2 inch plywood spacer to keep the right horn tip from touching the ceiling and wall the kudu was hung on.

I'm hoping the new trophy room with 9 feet walls and vaulted ceiling will allow for more room and space for my eland and Leche.

A sable with 8 feet walls should be doable with the head straight as if naturally walking.
 
Thanks guys for the pics and input
 
I’ll check them out and i was planning on possibly moving some whitetail mounts to a corner
 
Enjoy your mounts wherever you can hang them and when you build someday go with a 12’ minimum.
 

Forum statistics

Threads
68,539
Messages
1,524,597
Members
154,413
Latest member
Anke91E751
 

 

 

Latest profile posts

Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
I have not posted any items for sale on this forum and will not every put anything for sale. My account was hacked and I've worked with the admin to get things shut down.
 
Top