Another "Canuck" from Canada

8x68

AH fanatic
Joined
Mar 1, 2015
Messages
700
Reaction score
658
Location
Ontario, Canada
Media
12
Hunted
Canada, USA
Looking for suggestions as to what scope to put on a 404 Jeffery I'm having built. It is being built on a stainless Winchester Model 70 donor barreled action in 375H&H. I was thinking about something along the lines of a 1-4x20 with German #4 post reticle, or a red dot holographic sight of some kind.
Thx
Julian
 
Welcome to AH Julian.

DOC's fave and he might be able to give you a suggestion.

Look forward to pictures of the build when it's done.
 
Welcome to AH
 
hi julian welcome to AH. when do you hope it will be finished? got a nikon african monarch 1-4x20 on mine as thats what it was fitted with , but havent seen the rifle yet as its in transit and never used a nikon before ..............
 
Welcome to AH Julian!
 
welcome to AH , Julian
enjoy the site
 
hi julian welcome to AH. when do you hope it will be finished? got a nikon african monarch 1-4x20 on mine as thats what it was fitted with , but havent seen the rifle yet as its in transit and never used a nikon before ..............

I really like Nikon scopes especially the Monarch 3's of which I have several. I like the fact that Nikon makes it's own glass for the optics and you're not guessing where it was made. I also have a couple of Zeiss HD5 scopes and there is very little difference in optic quality between the two. Both the Nikon and Zeiss are crystal clear. I'm trying to get a Nikon African but as far as I am aware they don't make the African anymore but Nikon US does offer the 1-4x20 w/German #4 or heavy duplex.
rifle is "supposed" to be finished early summer, but the gunsmith I sent it to is quite busy so I'll have to wait my turn I guess. I'm in no hurry to get it. Gives me time to "play" with my 9.3.
 
Welcome to AH.

There are a lot of good scopes out there. Get what you like the best. The only thing I would recommend is to consider an illuminated reticle. In low light conditions, they can make the difference.

All the best.
 
Welcome!

A nice 1x4 should work just fine. Plenty of flavors to chose from.
 
hope you have been here then http://www.africahunting.com/threads/who-owns-and-uses-these-calibres.21278/ :)

nice to know that about the nikon scope

Yes I had indicated I had a 9.3x62. It's my friends fault (known him for 30+ years, and we hunt whitetail together in Ontario). He asked me if I had anything in between my 8x68 and 375H&H. I said I didn't. He told me I needed a 9.3x62....so I went and bought one. He then asked me if I had anything in between my 416 and 450 and I replied I didn't. He said I needed a 404 Jeffery...so I'm having one made. He asked me if I had a 300 Weatherby... I told him to &%@!# off. Yes....I now have a 300 Weatherby. My friend costs me a lot of money!!!!! LOL
 
Welcome!

A nice 1x4 should work just fine. Plenty of flavors to chose from.

That's what was thinking. I like the Nikon Monarch 3 1-4x20 w/German #4 reticle. Hawke has a Endurance 30 1-4x24
w/L4A Dot Reticle, but they're relatively new so not much info on the review side.
The Leupold tech I was talking to in Oregon suggested either a VX-3 1.5-5x20mm, Illuminated or Non-Illuminated, or
FX-II Ultralight 2.5X20mm
 
Welcome to AH Julian! Enjoy the site.
 

Forum statistics

Threads
67,097
Messages
1,487,407
Members
143,998
Latest member
KYSDarell
 

 

 

Latest profile posts

Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
Golden wildebeest cow cull hunt

swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is [redacted]. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray [redacted]

Reply with name/address and I'll get a check into tomorrow's mail.
Boela wrote on Slider's profile.
Good day, Slider.

Do you by any chance have any 500NE brass left that you are willing to part ways with?

Best regards,
Boela Bekker.
 
Top