A Double in .458 win?

But why insist on a non-rimmed DR round when there are so many double rifles available with excellent cartridges like 450/400, 450, 470 etc. etc..?
Agree 100% . All my doubles new and old use rimmed cartridges . Lower pressures , no extraction / ejection issues , plenty of ammo available .
 
Tony Seth-Smith had a second set of barrels in 458 Win Mag made for his Rigby 450.
 
But why insist on a non-rimmed DR round when there are so many double rifles available with excellent cartridges like 450/400, 450, 470 etc. etc..?
I suppose this is my question. Why?
 
The reason would be a good deal on a used Double Rifle.

Ones chambered in 458 win will typically sell for a bit less than one in .450 or .470
It is interesting to see the use of different calibers in doubles.
 
I believe Mike Fell was hunting with a double in 458WM while he was waiting for his new double to be built
 
Second to have a wider array of factory ammo available.
Unless it is a double with some form of adjustable regulation, you are going to be limited to the ammunition the gun regulates with. This is one of the biggest down sides to a double rifle.

I see no practical problem with a well made double in 458 WM. But I would be VERY picky on the maker and the guns condition.
 
After firing and you open the double and tilt it do the empty cartridges fall out or do they need to be removed by hand?
 
My two cents - yes it can be made to work but why stress it get a 470 NE job done - Life is simple Intelligent and the terminally stupid make it complicated!
 
After firing and you open the double and tilt it do the empty cartridges fall out or do they need to be removed by hand?
My Brno Super O/U .375 Holland & Holland ejects them....
...flawlessly.

HWL
 
I made two dud shots, dead primer, case, bullet, and powder.
It ejects both "complete cartridges" without any issues.
Brno are great guns!

HWL
 

Forum statistics

Threads
64,488
Messages
1,420,130
Members
130,642
Latest member
LawannaLom
 

 

 

Latest profile posts

Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top