A Double in .458 win?

But why insist on a non-rimmed DR round when there are so many double rifles available with excellent cartridges like 450/400, 450, 470 etc. etc..?
Agree 100% . All my doubles new and old use rimmed cartridges . Lower pressures , no extraction / ejection issues , plenty of ammo available .
 
Tony Seth-Smith had a second set of barrels in 458 Win Mag made for his Rigby 450.
 
But why insist on a non-rimmed DR round when there are so many double rifles available with excellent cartridges like 450/400, 450, 470 etc. etc..?
I suppose this is my question. Why?
 
The reason would be a good deal on a used Double Rifle.

Ones chambered in 458 win will typically sell for a bit less than one in .450 or .470
It is interesting to see the use of different calibers in doubles.
 
I believe Mike Fell was hunting with a double in 458WM while he was waiting for his new double to be built
 
Second to have a wider array of factory ammo available.
Unless it is a double with some form of adjustable regulation, you are going to be limited to the ammunition the gun regulates with. This is one of the biggest down sides to a double rifle.

I see no practical problem with a well made double in 458 WM. But I would be VERY picky on the maker and the guns condition.
 
After firing and you open the double and tilt it do the empty cartridges fall out or do they need to be removed by hand?
 
My two cents - yes it can be made to work but why stress it get a 470 NE job done - Life is simple Intelligent and the terminally stupid make it complicated!
 
After firing and you open the double and tilt it do the empty cartridges fall out or do they need to be removed by hand?
My Brno Super O/U .375 Holland & Holland ejects them....
...flawlessly.

HWL
 
I made two dud shots, dead primer, case, bullet, and powder.
It ejects both "complete cartridges" without any issues.
Brno are great guns!

HWL
 

Forum statistics

Threads
63,340
Messages
1,393,340
Members
123,694
Latest member
LavadaPrat
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top