What did you reload today?

44 special today. “Beer can” loads.
A 262 grain bullet from the RCBS 44-250K mold. Starline case, 4.5 grains of TiteGroup, and a Fiocci large pistol primer.
This load gives me 760 fps and good accuracy from the 7.5” colt new frontier.
image.jpg
 
today I finished up loads for my plains game cull and cape buffalo hunt in Sept. 9.3x62 will be shooting 210gr CEB tipped Raptors in my Sauer 100 and .458 win mag 400 gr CEB Safari Solids for back up 74 gr AA2230 at 2331 fps and 420 gr CEB Safari Raptors Tipped at 2431fps for first shot.
 
450gr Woodleigh RN SN for my 416 Ruger
Cheers
IMG_1559.jpeg
 
wolfhunter said:
375 HH practice loads with 270 gr speer I used varget powder because I have a lot of the stuff.
Click to expand...
Must be nice - Varget is hard to find around here and when I do they want $60+/lb
 
cwickgo9 said:
Must be nice - Varget is hard to find around here and when I do they want $60+/lb
Click to expand...
Varget has been in stock at a lot of vendors the last 4-6 months. Midway, Powder Valley, Natchez, Midsoith, etc. $50-$60 a pound I believe is the new normal sadly.
 
Loaded Thursday, shot last night...

143 grain Lever Hammers. 3 different loads; one showed promise in my Savage 99E .308.

130 grain Barnes TTSX. 3 different loads; frankly none of them impressed me much in my Ruger 77 .300 WM.
 
Tundra Tiger said:
Loaded Thursday, shot last night...

143 grain Lever Hammers. 3 different loads; one showed promise in my Savage 99E .308.

130 grain Barnes TTSX. 3 different loads; frankly none of them impressed me much in my Ruger 77 .300 WM.
Click to expand...
I will be interested to know how those 143 Lever Hammers work out for you. I have bounced around thinking of trying those in a 1-12 twist Winchester M70.
 
ldmay375 said:
I will be interested to know how those 143 Lever Hammers work out for you. I have bounced around thinking of trying those in a 1-12 twist Winchester M70.
Click to expand...

I have also tried the 128 grain Shock Hammer in my .338 Marlin. A couple showed some promise, but with both offerings I have tried I need more bullets, and I am debating whether the results I have had so far are worth the cost.
 
Wyatt Smith said:
44 special today. “Beer can” loads.
A 262 grain bullet from the RCBS 44-250K mold. Starline case, 4.5 grains of TiteGroup, and a Fiocci large pistol primer.
This load gives me 760 fps and good accuracy from the 7.5” colt new frontier.
View attachment 765131
Click to expand...
I'm another .44 Special fan. Good fun, & loaded up or down very versatile.
 
Yesterday it was windy and cold. It was a good day to load up some .375 H&H with 300gr A-frames, and .260 Rem Ackley fireform loads with 135gr Berger Hybrids. :)
 
Wet, cold, windy, a few snowflakes wafting down and even a meteor in the neighborhood yesterday—good time to load some practice rounds.

First up was 35 rounds of 300 H&H. Inexpensive Hornady 175 gr FMJ over H4831sc in Nosler brass for 2975FPS. Next was 50 rounds of 257 Roberts. Cheap 90 grain Hornady CX factory seconds in Hornady brass over IMR4350 for 3180 fps.
 
You must log in or register to reply here.

Members online

... and 1118 more.
Total: 133,686 (members: 1,168, guests: 132,518)

Forum statistics

Threads
68,408
Messages
1,520,963
Members
153,007
Latest member
Philiptyy
 

 

 

Proudly sponsored by

Latest posts

Latest profile posts

A
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
•••
Kdouglas3
Kdouglas3
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
•••
HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
•••
cgdemakis
cgdemakis
I have not posted any items for sale on this forum and will not every put anything for sale. My account was hacked and I've worked with the admin to get things shut down.
•••
P
Paul K wrote on cgdemakis's profile.
Paul
•••

Share this page

 
Top