Your opinion on selecting a .500 NE 3” or .470 NE?

There is NOT a very noticeable difference in effect on game between .470 and .500.

There is NOT a very noticeable difference in recoil between .470 and .500.

There IS a very noticeable difference in commercial ammo availability between .470 and .500.

To me, the .470 makes more sense just because of that...
 
Mark Sullivan disagrees as he considers the .500 as a starter caliber. :unsure:

I have no respect for Him or his methods for inducing charges, and trying to show his "cajones" are bigger than everyone else's.

I would absolutely choose a PH who has never had a charge or dangerous situation because they avoided them in the first place.
 
One way is if one's finger slips moments after the first shot and presses the back trigger.
So, when does an intercepting sear kick in ? Is it when both hammers are released simultaneously?
 
So, when does an intercepting sear kick in ? Is it when both hammers are released simultaneously?
It kicks in when you drop your rifle to the ground. Gunsmiths among us can explain it better I think.
 
I would absolutely choose a PH who has never had a charge or dangerous situation because they avoided them in the first place.
Almost impossible when hunting elephant or buffalo in free range countries. However, a few PHs I know quit hunting tuskless cows due to close calls they have had. They are leaving those hunts to the younger PHs.
 
The 500 NE has a slight edge on performance. But either cartridge will do a fine job of stopping dangerous game.

The difference in recoil is really more of a difference in who makes the gun. A properly made 500 isnt much different than a properly made 470.

I have had someone double my 500 and he didnt fall over or any nonsense like that. He just looked around sheepishly to see if anyone saw his mistake. :E Rofl:

In the end the choice between the 450 NE, 470 NE, and 500 NE is more of a matter of personal prefference. Focus more on the guns quality than the cartridge
 
I went the .470NE route simply because when I went to look for components to build my own loads, the components seemed much more available than in the .500NE.......for whatever that is worth today, I don't know.

I do wonder if anyone has developed loads using faster powder with a filler akin to what we see in the IMR3031 loads for the .470NE? I'd be surprised if no one has, but I haven't seen any.

That turned my .470NE into manageable with H4831 into a pussy cat. Ripped off some 20 rounds this past weekend with the IMR3031 loads, and that was from the bench.
 
I do wonder if anyone has developed loads using faster powder with a filler akin to what we see in the IMR3031 loads for the .470NE? I'd be surprised if no one has, but I haven't seen any.
RL 15 with a filler works for .500 NE
 
I think everyone has covered all these pros and cons already, except one.

If your ammo gets lost or you run out of ammo in Africa, you’re SOL with 500NE, but you may have a shot of finding some ammo in 470NE in places like Zimbabwe. The 470NE has been a professional’s choice for a very long time and that additional lifeline, coupled with easier to source components stateside and less recoil have made me a dyed in the wool 470NE owner.

There is nothing wrong with a 500NE whatsoever, but its not getting you enough of a good thing to overcome the 470NE’s benefits in my opinion.
 
If your ammo gets lost or you run out of ammo in Africa, you’re SOL with 500NE, but you may have a shot of finding some ammo in 470NE in places like Zimbabwe.
I disagree with this, especially for Zimbabwe. Plenty of .500 NE ammo, especially at CMS. ;)
 
One way is if one's finger slips moments after the first shot and presses the back trigger.
So are we saying the sears aren’t effective in preventing a double fire? That’s surprising, because my understanding is that on a properly functioning modern double, the intercepting sears should prevent exactly that. If a double fire still happens, then something is out of spec, out of adjustment, or simply not working the way it’s supposed to.

This is what Google says -
That’s why a double rifle firing both barrels at once is a serious malfunction, because it means either:
  • The intercepting sears failed,
  • they’re out of adjustment,
  • something is worn or broken, or
  • The rifle was never correctly set up to begin with.
 
Intercepting sears prevent a firing due to being dropped, jostled, or jarred.

Strumming the back trigger is bad technique and that’s what it sounds like happened.
 
So are we saying the sears aren’t effective in preventing a double fire? That’s surprising, because my understanding is that on a properly functioning modern double, the intercepting sears should prevent exactly that. If a double fire still happens, then something is out of spec, out of adjustment, or simply not working the way it’s supposed to.

This is what Google says -
That’s why a double rifle firing both barrels at once is a serious malfunction, because it means either:
  • The intercepting sears failed,
  • they’re out of adjustment,
  • something is worn or broken, or
  • The rifle was never correctly set up to begin with.
The man said if the finger slips and pulls the second trigger. How is anything going to stop that other than a gun set up to require the safety to be cycled between shots? The nervous response to recoil setting our finger forward is to pull it back to the last commanded position. Combine this with a firing hand that has changed position during the first firing and you get setup to double very quickly. This is no fault of the gun; it is merely doing what it is commanded to do. If it happens so quickly the shooter is unable to process it, bad luck for them. Intercepting sears will not help in this case, but they will help if the gun in dropped or if only one trigger is actually pulled from firing two shots.
 
Ive shot exactly 2 rounds from a 500 NE.. and a total of 4 rounds from two different 470 NE... so I am far from an expert..

But.. I'd personally probably go with the 470.. if for no other reason there appears to be more of them and components are more affordable and easy to find.. ammo is more affordable and easier to find, etc (albeit something of a non issue in reality.. when youre talking about spending $305 for a box of Federal premiums in 500 and $295 for a box of Federal premiums in 470.. does saving $10 a box really matter???? lol)...

It could have been the guns (fit, weight, etc).. but I found the 470's I shot to be stout, but pretty easy to manage in terms of recoil.. they were "enjoyable" to shoot..

the 500... well.. not so much lol.. It wasnt horrible.. and it was certainly manageable.. but there was certainly nothing pleasurable about it..
Dave,

You can come shoot my Heym 500NE anytime, and not to worry - I've got lots of ammo. If you run out, I know where they sell it. The rifle is brand new and could use some rounds through it.
 
The rifle in the video seems to have sidelock actions so that if it really was a double-fire, that is right, both triggers would have been pulled. How something like that is possible is unclear to me, because the recoil tends to push the rifle back, causing in many cases that the back of the middle finger hit the trigger guard, but the index finger cannot activate the back trigger. With a boxlock action, it is a bit different and a double firing can occur, regardless of the shooters handling.
 
The rifle in the video seems to have sidelock actions so that if it really was a double-fire, that is right, both triggers would have been pulled. How something like that is possible is unclear to me, because the recoil tends to push the rifle back, causing in many cases that the back of the middle finger hit the trigger guard, but the index finger cannot activate the back trigger. With a boxlock action, it is a bit different and a double firing can occur, regardless of the shooters handling.
I have posted this before:

Someone, (who shall remain nameless), put his tiny little fingers into both triggers of the L.C. Smith 12 gauge double his father had just given him to step up from his single-shot Iver Johnson 20 gauge.

"That's not a good idea" - I was standing the first time he said it.
 
The rifle in the video seems to have sidelock actions so that if it really was a double-fire, that is right, both triggers would have been pulled. How something like that is possible is unclear to me, because the recoil tends to push the rifle back, causing in many cases that the back of the middle finger hit the trigger guard, but the index finger cannot activate the back trigger. With a boxlock action, it is a bit different and a double firing can occur, regardless of the shooters handling.
Boxlocks are more prone to doubling ?
 

Forum statistics

Threads
64,419
Messages
1,418,356
Members
130,211
Latest member
Reed09Q30
 

 

 

Latest posts

Latest profile posts

wheelerdan wrote on Jager Waffen74's profile.
Sir, I think I have been writing to you about the purchase of the HK 639 rifle under an email "Tt Jake." If this is you, then I am truly interested. I am just trying to verify identify. Tt Jake is asking for a cash transaction. No disrespect intended, Just trying to verify who I am talking to. Thank you. Respectfully. Dan
Gary C wrote on HuntingFreak's profile.
Hey my friend, I am returning to SA for a Cape Buffalo hunt in June 26. My outfitter has suggested Highveld but I have read some poor reports. Wondering how satisfied you were with your mounts from them? Thanks in advance.
Finally back to somewhat normal I missed reading the messages and posts
 
Top