which powder

[yamoon]

Things are working out, to get the 1910 9.5x57 M-S shooting. Dies in route, likewise Speer 235gr bullets. I have Ball c2 and WW748, any thoughts on a starting load. I will be using 30-06 brass.
Thanks Mike

 

[SaintPanzer]

I'm looking for a similar load, and managed to find some 270 grain Woodleighs for it.

I haven't found many loads yet, but loaddata.com has some listed. I've also seen discussions at the Nitro Express forums. Right now I'm trying to gather as much info as I can and then run it all through quick load.

 

[Bob Nelson 35Whelen]

Things are working out, to get the 1910 9.5x57 M-S shooting. Dies in route, likewise Speer 235gr bullets. I have Ball c2 and WW748, any thoughts on a starting load. I will be using 30-06 brass.
Thanks Mike

@yamoon
Here are some loads from load from a disc using .375 diameter projectiles that may be of use.
They are from load from a disc and using different projectile and powders. See bottom left corner for projectile weights and seating depth.
Cheers mate
Bob

 

[Bob Nelson 35Whelen]

 

[Bob Nelson 35Whelen]

 

[yamoon]

Thank you, the information is very helpful
Mike

 

[F. Vaccaro]

Interesting, I wonder how close this is to the .375 Whelen?

 

[yamoon]

The 375 Whelen would have more case capacity as 35 Whelen is often used as donor brass to make 9.15x57 cases, they have to be shortened to 2.24 inched and shoulder set back & neck expanded.
Mike

 

[Bob Nelson 35Whelen]

Thank you, the information is very helpful
Mike

@yamoon
If you need something more specific give me a call. Couldn't find anything using 748 sorry.

 

[yamoon]

Thanks again, I made up 20 cases from 30-06 brass, much easier than I expected. Now a trip to the range is in order.
Mike