What Have You Killed with the 7x57

Took my Paul Jaeger custom 7×57 on its first trip since I owned it. Killed 4 blacktails on POW island. Worked splendidly, but the oil finished stock wasnt the best for hunting in a week if near constant rain.
1000042407.jpg
1000042404.jpg
1000042296.jpg
 
Did the rain damage the finish, or did the stock warp?
Couldn’t you just put a few new coats of oil on the stock?
 
The stock didnt warp, but it raised the grain and darkened the wood near its interface with steel parts due to gun oil leaching into the stock finish. I had to wipe all steel parts down daily with oily rag. I am currently in the process of renewing oil finish, carefully knocked down raised grain with 320 sandpaper, have TimberLuxe oil finish on order.
 
The stock didnt warp, but it raised the grain and darkened the wood near its interface with steel parts due to gun oil leaching into the stock finish. I had to wipe all steel parts down daily with oily rag. I am currently in the process of renewing oil finish, carefully knocked down raised grain with 320 sandpaper, have TimberLuxe oil finish on order.
If I lived where you hunt, I would possibly thin Acraglas liquid 50% with acetone and let it soak into the wood like water. Then when you finish over that it WILL be waterproof. And I would for sure do it in the inletting. They use this method sometimes in Alaska.
 
I used a Brno 21H with 162 gr Kegelspitz RWS factory ammo on a nice bull moose. Range was about 200 yards, broadside. He jumped at the first shot and moved forward about 10 yards. I hit him again and a fell over. Both shots were behind the shoulder and through both lungs. I recovered the bullets from under the hide.

Picture perfect performance from the bullet:
1765658163314.png

1765658187058.png
 

Forum statistics

Threads
64,755
Messages
1,426,340
Members
132,499
Latest member
fosterjodie792
 

 

 

Latest profile posts

American marketing tour update!

flights are booked Uber rides confirmed, car hire deposit paid! Hotels booked!

Im getting ready to go but first I have a 3 week photo Safari tour scouting some locations in the Limpopo province for future Photo safari tours! watch this space for awesome updates and footage !!!

Remember ISE Show 8-11 Jan in Denver Colorado!

Then from there I will be traveling by car for over a week
gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
 
Top