Target shooting

Dr Ray

AH legend
Joined
Apr 1, 2017
Messages
4,298
Reaction score
6,530
Location
Cairns, Australia
Media
53
Articles
5
Hunting reports
Australia/NZ
7
Member of
Sporting Shooters Association of Australia + CRM Gunsports (Cairns)
300 Winchester magnum - B muzzle break

195 grain Hornady ELD match bullets with 82 grains AR2225 powder.
Somehow my right hand index finger got jammed or crunched.
Makeshift bench and set up we’re not ideal. This set up somehow contributed to my finger getting a whack.

file:///var/mobile/Library/SMS/Attachments/33/03/BC1AA3B1-7F5C-4912-B6B0-060E82D3E076/IMG_2749.mov
 
Last edited by a moderator:
300 Winchester magnum - B muzzle break

195 grain Hornady ELD match bullets with 82 grains AR2225 powder.
Somehow my right hand index finger got jammed or crunched.
Makeshift bench and set up we’re not ideal. This set up somehow contributed to my finger getting a whack.


file:///var/mobile/Library/SMS/Attachments/33/03/BC1AA3B1-7F5C-4912-B6B0-060E82D3E076/IMG_2749.mov
Link dosent work Ray.
 
Attached at last.
This rifle is a Remington 700 Model - only the action and stock, I had a gunsmith fit a 24 inch medium weight stainless steel barrel and replaced the trigger system with a Timney trigger set for 3/4 pounds pressure. I had a muzzle brake fitted as the recoil at the bench was what I call - sharp snap.
I put a Nightforce 12-42 x 56 scope on the rifle. The handloads I was shooting - 195 Hornady ELD match bullets with a compressed load of AR2225 powder (82 grains). I also loaded 208 Hornady ELD match bullets with 81 grains of AR2225 powder.
I will test the groupings at a proper benchrest (under cover). Where I shot Saturday was hot and very humid - rain started that evening and is unlikely to stop until at least Friday.
Both these loads were compressed powder loads and when I go to Kurrimine Beach range (some distance away) I hope my friend Ron will go as he has a velocity measurer (Lab Pro I think).
I have the 300 sighted in for 300m using factory 180 grain Federal bullets. My handloads printed the same horizontally (sheer luck) but I will check at Kurrimine Beach soon after a trip for fallow.
I'm off to Tasmania Friday 17th March to go fallow deer hunting using my 25/06 with 117 grain bullets.
I have 1 stainless steel buck tag and I can shoot as many does as I like (but only one buck). Shooting spikers is prohibited.
I'll try to attach, soon the handloaded 300 Winchester with the 195 grain and 208 grain Hornady bullets.
 
Still trying to get the video to load properly
 
at the bench
 
I don't think you can attach a video. Put it on Youtube and link to that.
 

Forum statistics

Threads
68,684
Messages
1,528,450
Members
156,182
Latest member
ElvisMccra
 

 

 

Latest profile posts

Stnelson wrote on Never Been's profile.
I want one of the stocks.
buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top