Suppressed Double

[Forrest Halley]

I'd like one in .375 H&H... that'd be something.

 

[CoElkHunter]

+1
Except they look like military weapons which are banned.

I thought only military cartridges were banned? It doesn't matter because they're semi autos which are banned for hunting in Africa, except if you're Razor Dobbs (somebody pull up that video) with his 10mm pistol hunting buffalo. I guess if you're "somebody" with a corporate sponsor (MONEY!) you can bring your semi auto and hunt however the he** you want to?

 

[thriller]

I'd like one in .375 H&H... that'd be something.

Somewhere out there on the internet a m1 grand is being manufactured in 458 win mag.

 

[CoElkHunter]

I'd like one in .375 H&H... that'd be something.

A .375/.338 would fit in the magazine and chamber without modifications except for the barrel. Same with a .416 Taylor.

 

[Ridge Runner]

Semi auto shotguns are permitted for waterfowl and bird hunting.

I'll have to go back to the handgun laws for RSA. But I think, if the barrel is legal length, caliber and velocity are legal for the intended species of animal, a semi auto pistol can be temporarily imported into RSA.

I have seen 2 PH's carrying semi auto 9mm. Concealled, until their shirt road up when they sat down. They didn't say and I didn't ask.

The handgun regs were so confusing I just contacted Henry at Henry Rifle Premits and asked if my 44 mag revolver with a 4 5/8 inch barrel was legal back up for buff, filled out the SAPS 520 and it was approved for import.

 

[CoElkHunter]

Semi auto shotguns are permitted for waterfowl and bird hunting.

I'll have to go back to the handgun laws for RSA. But I think, if the barrel is legal length, caliber and velocity are legal for the intended species of animal, a semi auto pistol can be temporarily imported into RSA.

I have seen 2 PH's carrying semi auto 9mm. Concealled, until their shirt road up when they sat down. They didn't say and I didn't ask.

The handgun regs were so confusing I just contacted Henry at Henry Rifle Premits and asked if my 44 mag revolver with a 4 5/8 inch barrel was legal back up for buff, filled out the SAPS 520 and it was approved for import.

I knew the PHs could because they live there. I guess I'll have to try a SAPS 520 for my 10mm Glock "back up" gun for hunting Duiker? LOL

 

[Ridge Runner]

I knew the PHs could because they live there. I guess I'll have to try a SAPS 520 for my 10mm Glock "back up" gun for hunting Duiker? LOL

Just make sure your barrel is a bit over minimum length. I measured my Magnum Reseach 44 BFR, it was supposed to be 4 5/8 inches and that's how I listed it on SAPS 520 then I actually measured it with digital calibers in mm. I was 1mm short of legal. I didn't tell and SAPS didn't ask or measure the barrel. SAPS did ask where the scope was. I said I use iron sights and Henry said something to them in Afrikaan, SAPS nodded and closed my gun case.

 

[CoElkHunter]

Just make sure your barrel is a bit over minimum length. I measured my Magnum Reseach 44 BFR, it was supposed to be 4 5/8 inches and that's how I listed it on SAPS 520 then I actually measured it with digital calibers in mm. I was 1mm short of legal. I didn't tell and SAPS didn't ask or measure the barrel. SAPS did ask where the scope was. I said I use iron sights and Henry said something to them in Afrikaan, SAPS nodded and closed my gun case.

Well, my Glock Model 40 10mm has a 6" barrel with Trijicon night sights for hunting leopards and jaguars at night. Those don't weigh nearly as much as the buffalo Razor Dobbs was hunting with his 10mm, so I should be OK? LOL I'm sure Henry was telling the SAPS guy that his six pack of COLD Black Label beer would be waiting for him after work, so you got lucky this time with your scopeless revolver. Next time, who knows? LOL

 

[Ridge Runner]

Well, my Glock Model 40 10mm has a 6" barrel with Trijicon night sights for hunting leopards and jaguars at night. Those don't weigh nearly as much as the buffalo Razor Dobbs was hunting with his 10mm, so I should be OK? LOL I'm sure Henry was telling the SAPS guy that his six pack of COLD Black Label beer would be waiting for him after work, so you got lucky this time with your scopeless revolver. Next time, who knows? LOL

I think Henry was telling the SAPS guy something else, like the forms have been approved now shut the damn case so we can leave or I'll call your boss.

I probably should have mentioned this earlier. A client of Henry had obituary changed his flight itinerary and arrived earlier than expected at 2 am instead of later in the morning. Because of his early arrival SAPS called Henry to help get his client's premit straightened out. I arrived around 4 or 5 am, SAPS saw my Henry permits form and told they had already called Henry for the other guy. Because I was transiting through to Zimbabwe I wasn't expecting to see Henry until I returned from Zimbabwe 12 days later. Through all the confusion I ended up with a 30 day permit from SAPS.

 

[Forrest Halley]

A .375/.338 would fit in the magazine and chamber without modifications except for the barrel. Same with a .416 Taylor.

I believe I'll stick with the H&H. I have neither desire nor affinity for the wildcats of this particular caliber.

 

[Bob Nelson 35Whelen]

That’s wild...would pair well with the 458WM Garand.

My shoulder would hate such things.

I want one of each.

@Ridge Runner
Go one better and get it in 460 Weatherby
Bob

 

[BeeMaa]

@Ridge Runner
Go one better and get it in 460 Weatherby
Bob

Let’s just make it a Barrett M82A1 50BMG…with a brake of course to stay on topic.

 

[PARA45]

Let’s just make it a Barrett M82A1 50BMG…with a brake of course to stay on topic.
View attachment 592943

But wait, it's a push feed and not CRF, which makes it not suitable for DG.

 

[Rubberhead]

Yep...suppressors for a double...

 

[Ridge Runner]

@Ridge Runner
Go one better and get it in 460 Weatherby
Bob

Nice idea. Since I'm set for reloading 458WM. I don't really want to load up on dies, bullets and powder at today's prices for another caliber.