Snap Caps for Doubles

[Surgeon1]

My snap caps are just worn out. Can't seem to find snapcaps for 500 Nitro base (470NE, 500NE, 450 3-1/4, etc) Also need for 450-400 and 375 Flange (9.3x74).
I would appreciate any help.

 

[deewayne2003]

Lothar Walther- so much better than the azoom caps I’ve had before.

Snap Cap | .470NE | PP-470NE

Snap cap for rifle

www.lothar-walther.com

 

[Buckums]

i have been looking for 470 NE snap caps as well. just ordered two of the Lothar Walther. thanks for the info.

 

[SETH RINGER]

fakebullets.com has a bunch of options, just have to wade thru it to find what you want.

 

[wvfred]

I ordered my 500 snap caps from African sporting creations recently.

 

[farmer_john]

If you got some friends with a reloading press just have them make you a dummy round with some hot glue in the primer pocket

 

[deewayne2003]

If you got some friends with a reloading press just have them make you a dummy round with some hot glue in the primer pocket

You can do it, but it's inferior to the spring loaded primers on the Lothar Walther ones.

FYI there is a reason why doubles used to come with a piece of hardwood or horn to drop the firing pins against, I've used a piece of horn before the the dents left are substantial; that hot glue or rubber will not last long or offer the same cushion as the true spring loaded snap caps.

 

[deewayne2003]

I ordered my 500 snap caps from African sporting creations recently.

Their the exact same snap caps as Lothar Walther.... Just marked up 160% and sold in pairs
($26.40 vs $69.00)

Snap Cap | .470NE | PP-470NE

Snap cap for rifle

www.lothar-walther.com

Rifle Snap Caps (Pair)

Check out the deal on Rifle Snap Caps (Pair) at African Sporting Creations

www.africansportingcreations.com

The Lothar website has a very poor picture, but I assure you they are the same.

 

[Chimpondoro]

Hi everyone,
I use snap caps for all my double rifles, double rifle drillings and combination guns.
It’s important to use ones without anodizing. In my Merkle, I had some with red anodizing, and after a short time, superficial corrosion developed in the chamber. After I polished the snap caps until they were bare metal, the problem never occurred again.
Since then, I’ve only used solid aluminum snap caps without any coating.

It's always a pitty to polish out the chambers...

Hope this helps a bit.
Greetings from Bavaria.

 

[V.Veritas]

I've got mine form Trader Keith.

 

[Surgeon1]

Trader Keith any contact info? They used to have a web site

 

[Moody808]

Trader Keith any contact info? They used to have a web site

Here you go. They do have a website but it is awfully glitchy and you often get a 400 error message.

1 (800) 338-3146
info@traderkeith.com

 

[SStomcat]

http://www.traderkeith.com/products.html link