Has anyone had issues with the spring on the extractor blade on the bolt? I think mine has failed because it is having a problem ejecting.
Thanks!
Thanks!
World's most popular community & resource for hunting in Africa since 2007
Sako 85
- Thread starter ShaneLyle
- Start date
375Fox
AH ambassador
- Joined
- Feb 19, 2020
- Messages
- 6,097
- Reaction score
- 20,947
- Location
- Pennsylvania
- Media
- 173
- Hunted
- Zambia, Namibia, South Africa, Zimbabwe, Cameroon, Tanzania
Is it a new rifle to you or one that previously worked well? Sako 85s have a problem of ejecting at too high an angle and hitting scope with certain cartridges particularly 375 H&H
It has been a degenerative issue. It worked well and now is an issue. When the shell is being injected, it hits the top of the receiver at the very end of the casing. It is not getting fully removed before it ejects.
Not injected - ejected. Typo sorry
mark-hunter
AH ambassador
What is the caliber of this Sako 85?
mdsalern
AH enthusiast
I would check that the ejector blade that pushes through the bolt as you cycle the bolt backward has not been damaged in some fashion. If it has not, then throw an extractor parts kit at it and see where the chips fall.
Replace the spring and plunger first keeping the original extractor if it shows no signs of damage/wear. Should that not solve the problem then replace the extractor as well.
I wrap the bolt in a towel and put it in a vice, then use a small pick to push down the plunger and a micro electronics flat head screwdriver under the extractor to pry it out. It takes some time to wiggle it just right and get it to release. You may want to wrap the end of the bolt with a bag while you do this, or the parts may go flying. A pair of needle nose vice grips work to put the extractor back in easily. Put the extractor lip in between the serrations to not damage it.
www.midwestgunworks.com
Replace the spring and plunger first keeping the original extractor if it shows no signs of damage/wear. Should that not solve the problem then replace the extractor as well.
I wrap the bolt in a towel and put it in a vice, then use a small pick to push down the plunger and a micro electronics flat head screwdriver under the extractor to pry it out. It takes some time to wiggle it just right and get it to release. You may want to wrap the end of the bolt with a bag while you do this, or the parts may go flying. A pair of needle nose vice grips work to put the extractor back in easily. Put the extractor lip in between the serrations to not damage it.
Extractor Spring
Parts listed here are designed for both the Sako 75 and 85 bolt action rifle models chambered in their various action-sized calibers unless noted otherwise. MGW offers replacement stocks, firing pins, bolt assemblies, trigger guards, springs, pins and other small parts for these rifles. Outfit...
Attachments
.416 Rigby
Nomore606
AH senior member
I had a similar issue with my 7x64. I purchased the extended spring and trimmed to length: https://www.gretanrifles.com/product-page/10-pack-sako-extended-spring
Now, it ejects flawlessly.
Now, it ejects flawlessly.
Attachments
Members online
- hunt30
- JE245
- Albert GRANT
- Dakota Hunter
- wingshot74
- meigsbucks
- Ryan Brown
- KCSafari
- Todd Fall
- wvfred
- ay2626
- Cme1983
- a_alrumaidhi
- OSU
- farmer_john
- Tanks
- Newboomer
- Wooster
- Happy Myles
- Hunter-Habib
- prdhuntrs
- Robmill70
- Fixfire
- samson7x
- mms45
- double rifle newbie
- Atticus
- hoytcanon
- Custom
- Hedge774
- buckstix
- Berettaco
- Betterinthebush
- txtrout75218
- Ontario Hunter
- Mekaniks
- Hogpatrol
- Andrew62
- Angelo_orygun
- Trogon
- Hela52
- tinktink12
- Aaron N
- horsedoc49
- Kharn
- SCmackey
- jstafng
- schmijar
- Hammergun
- Jokulhan
Forum statistics
Latest profile posts
swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is [redacted]. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray [redacted]
Reply with name/address and I'll get a check into tomorrow's mail.
I'm Ray [redacted]
Reply with name/address and I'll get a check into tomorrow's mail.
Boela wrote on Slider's profile.
Good day, Slider.
Do you by any chance have any 500NE brass left that you are willing to part ways with?
Best regards,
Boela Bekker.
Do you by any chance have any 500NE brass left that you are willing to part ways with?
Best regards,
Boela Bekker.
