Reloading

[Shipwreck]

Good day thanx for accepting me I love to hunt with my CZ 7x64 and just bough my reloading set to start reloading my own ammo,I've got Norma 203B powder and Sierra game king 150 gr bullets. Can anyone help me with reloading spec's and some tips please

 

[CBH Australia]

G'day and welcome.
I'm not much help but I read a little here about 7x64 and others. They say .280rem is very close in specs etc . Both work well, they were just developed on different continents with different units of measurement.
Im a fan of 7mm rounds because my 7mm-08 impressed me and through this site I learned about the .280ai. be careful, who knows what they will talk you into.

 

[Mark A Ouellette]

Can anyone help me with reloading spec's and some tips please

Welcome aboard!

If you want answers to reloading questions, try posting in the Reloading forum in the Firearms, ammo, optics & gear sub-forums.

 

[375 Ruger Fan]

You should probably invest in a reloading manual. The Hornady manual does list the 7x64 Brenneke.

I have an old Speer reloading manual from 1970. It does not list the 7x64 but under the 280 it lists along with it, the 7mm-06 and 7x64.

Nosler has a public website with reloading data. This is a snapshot for the 280 and 150 gr bullets.

 

[Shipwreck]

thanx alot

 

[shootist~]

7x64 | Reloading data for hand loading ammunition

www.norma-ammunition.com

The Norma online reloading site shows the 7x64 and your 203B powder, including the suggested COL (cartridge overall length). I would start there by loading a few at the Minimum Suggested Powder Charge - for your specific powder - (the starting point), using whatever bullets they show that equal or run close to your bullet's weight and style.

If possible, find an experienced local reloader to walk you through things in person the first time. Setting up dies, lubing cases, sizing cases, priming cases, weighing & dropping powder, seating the bullet, etc.

In addition:
A) get a good reloading manual that shows all the steps AND
B) find a good YouTube video that does the same.
C) be safe, go slow, and wear eye protection.

 

[Wyatt Smith]

If at all possible, spend an afternoon with an experienced reloader watching him reload. Read a good manual, your time, and always start with the minimum load and work up.

 

[Ridgewalker]

Shipwreck, welcome to the AH forum! I see you are already getting some leads on your 7x64. Best of luck with your new toy!

 

[Woodcarver]

Good day thanx for accepting me I love to hunt with my CZ 7x64 and just bough my reloading set to start reloading my own ammo,I've got Norma 203B powder and Sierra game king 150 gr bullets. Can anyone help me with reloading spec's and some tips please

Welcome to AH! Good to see another hunter getting into reloading!
There are several good sites online that have reloading data, but the 7x64 isn't on all of them. The Norma site is probably your best bet to get started as it does list the powder you have.
Until you have become a very experienced reloader, don't extrapolate loads from "similar" cartridges or a different powder than what's shown just because it has the same number but is made by a different company, i.e., H4350 or IMR4350. They are not interchangeable.
Best advice given is to find a mentor that can help you get set up and rolling. Have fun!

 

[375 Ruger Fan]

Nathan Foster in NZ has an impressive website that is a great resource to study various calibers, bullets, etc.


This is the link to the 7x64 webpage

7x64 Brenneke

www.ballisticstudies.com

 

[gbflyer]

I see you’re in SA so this is not helpful for you. However, I recently saw factory Remington 7x64 loads at a Sportsman’s Warehouse for $19.99 a box. Makes a person consider that cartridge on this side of the pond!