Pre-64 Model 70 Winchestet Custom 7mm Rem Mag Lightweight

Any buyers before I move this to Guns International?
It may not last long there on the open market...
 
To the top for a lightweight 7mm Rem Mag Pre-64 Model 70 Winchester...
 
I handled this rifle last night. It mounts more like a gouse gun (shotgun) than a magnum rifle!
 
Would you consider just selling the stock?
Thanks for bumping this threat to the top but from my first post:

"Serious inquiries or questions please contact me via Direct Message.
I will provide my phone number if you desire to discuss."

The stock alone is worth $2500. That's what the stock work would cost plus the cost of the wood.

This rifle shipped is $2900.
 
I was asked about the chamber of this Pre-64 Model 70 in 7mm Rem Mag.

The action was manufactured in 1960, and the 7mm Rem Mag was not commercially available until 1962. Further, to my knowledge, Winchester never chambered any Model 70 in this cartridge until after all the Pre-64's were produced.

This rifle has a barrel made after 1963. My guess is that the rifle was built on a 1960 action sometime in the last 10 or may even 20 years. The wood is not "dark" in any area as can happen over time...
 
This Pre-64 Model 70, 7mm Rem Mag is not only beautiful but also a very light carry all day rifle.

I will lower the price to $2,900 shipped.
 
Come on guys :)
 
Gentlemen,

Here is a lovely, lightweight, long range rifle that will make you the envy of elk camp!
This Pre-64 Model 70, 7mm Rem Mag is not only beautiful but also a very light carry all day rifle.

This rifle handles like a magic wand! Obviously it is not a heavy target rifle. Rather, it is a powerful carry all day rifle.

Weight: 6 lb 11 oz with Leupold bases
Year made: 1960

Chambering: 7mm Remington Magnum
Barrel length: 24”
Twist Rate: 1 in 10”
Diameter at muzzle: .488”

Stock: English Walnut
Checkering: Borderless with 24 lines per inch
Recoil lug bedded with what appears to be Devcon
Drop at Comb: 1 & 5/16”
Drop at Heel: 1 & 9/16”
Length of pull: Trigger to end of recoil pad 13 & 3/8” including a total length of pad of 5/8”
Trigger to end of wood at butt: 12 & ¾”

Balance point: Appoximately 7/8” behind the front action screw

$2,900 shipped.
 

Forum statistics

Threads
60,994
Messages
1,332,799
Members
113,846
Latest member
healthydfbs
 

 

 

Latest profile posts

Most of my hunts are solo — just me, my rifle, and a good map. Sometimes I tag along with an old buddy for a week in Zimbabwe or South Africa, but more often than not, it’s just me.
Big fan of classic hunting — bolt-action rifles, old-school tracking, and taking the time to really be in the moment.
Just did a podcast, check it out if interested!

 
Top