Issac Hollis & Sons Double 9.3x74R

Ejector Rifle

Everyone ask how it shoots so I went and shot it. First one I kinda pulled then you can see the next 3.
40 yds offhand with some cheap RWS ammo I had.

092CCAA8-F1D9-4CF5-B8D6-0BC9809F41CE.jpeg
 
What are the barrel length and the stock dimensions (i.e. LOP, etc.)?
 
It looks like it was originally chambered for 400/360 Express. Any idea of who rechambered it and did the rechambering clean up the everything? Do you have pictures of the fired cartridges?
 
Yes I found this out after alittle research it was sent back to Britain in 2010 but do not know who did the work.
 
The rifle is proofed for a 400/360. Was it rechambered and reproofed for the 9.3x74R?

Were the barrels rebored for a .366" bullet? I ask because the bullet for the 400/360 is a 0.358" bullet.
 
It was rechambered and reproofed for a 9.3x74R. As far as barrel rebored I assume so because I was shooting factory 9.3x74R and you can tell it shoots very good.
 
It was rechambered and reproofed for a 9.3x74R. As far as barrel rebored I assume so because I was shooting factory 9.3x74R and you can tell it shoots very good.


The London proof house (or Birmingham) will not play games with these conversion guns. While they don't care what the bore diameter is, they proof it using a 9.3x74R proof load. They will not and do not take 9.3 cartridges and special order .366" bullets.

So regardless of the bore diameter, whether it was lapped bigger or not, the proof house is shoving a 9.3mm cartridge in the gun and firing it.

400/360 was unobtainable in the 1960s-1990s and many were converted to 9.3x74r as a consequence.
 
6k shipped. Everyone wants to know the bottom dollar that is it. Beautiful old double that is a proven shooter.
 
Not to be a pain, but can we have a look at the standing breach face?
 

Forum statistics

Threads
63,374
Messages
1,394,216
Members
123,885
Latest member
KrystalRot
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top