Help to reload

BigCat

New member
Joined
Mar 3, 2025
Messages
14
Reaction score
9
Hi all, could someone who has the Woodleigh reloading manual check for data on reloading the 577/500 3 1/8 caliber? Thanks a lot
 
I haven't had a 3-1/8" rifle but have reloaded the No.2 quite a bit.
The usual smokeless load is with 4198 (H or IMR) and a filler - I use backer rod.
A good regulating load for the one double I had was 54grs H4198 and a paper patched 450gr bullet.

I would think that, if your rifle is nitro proved, you would be leaning toward a heavier charge and heavier bullet but 4198 can surely be used.
What rifle are you loading for?
 
Sorry, just looked all through my woodleigh book and can’t find that caliber.
Saves me looking. As far as I know there is only one edition.
Unfortunately they did not publish data for .375H&H either but there are probably many covered that are not listed in other manuals
 
Mine is copyright 2014, I'm assuming that's the 2014 edition, as I didn't see "first edition published..." "second edition published..." on the copyright page.

For the .375, this plus 3 more pages.
375.jpg
On the 577, I see a 3 inch, but not a 3 1/8 inch. I don't know enough about those cartridges to know if that's helpful.
577a.jpg
577b.jpg
 
Last edited:
Your book doesn't have 375H&H?.... Mine does
Thanks, I will check because Saint Panzer does.

From memory mine doesn’t. I m pretty sure I even emailed Woodleigh and received a response along the lines of it was not included at the time of printing but I could use .375flanged data.

When I purchased the book it was because of my interest in the larger cartridges and the only one I hold at present is a .375H&H so I sort of wanted the book to make reference to one of the most popular DG cartridges available that forms a port of my small collection of related items
 

Forum statistics

Threads
65,211
Messages
1,438,813
Members
135,001
Latest member
LydiaCarpe
 

 

 

Latest posts

Latest profile posts

I have made it to Atlanta this morning, few other outfitters on same flight and our luggage never came trough, looks like mine will go via France to Denver hope it gets there before the ISE show starts on the 8th TOMORROW!



flying to Denver in an hour! is it to early to hit the bar:)
FIXING TO HEAD TO DALLAS FOR TEXAS TROPHY NEXT WEEK YALL COME SEE THE EVENT.
TakeMeLord wrote on Hunt anything's profile.
Suppressor Question.. you shot a waterbuck, followed vapor trail.
May I ask: Brand of Suppressor? Caliber of rifle
AND
Dis airport secutity give you any hassles about the silencer? Thanks, Dale
RolandtheHeadless wrote on intj's profile.
Hi. Will you take $90 including shipping for the 28 Nosler brass?

Jim
Mauser3000 wrote on HBartley's profile.
Hello,

I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?

Thank you.

-Nathan
 
Top