Help Identifying Unknown Optic

KurtVH

AH senior member
Joined
May 9, 2024
Messages
65
Reaction score
62
Location
Mandeville, LA
Hunted
United States, Canada
I recently purchased a Winchester Model 70 in .300 H&H that came with a scope. I've never seen the brand before and Dr. Google has not been helpful. Anyone seen or heard of an "SUI" scope? No markings on the turret caps or anywhere else on the scope.

Thanks in advance for any help.

SUI Scope.JPG
SUI Scope 2.jpg
SUI Scope 3.jpg
SUI Scope 4.jpg
 
Last edited by a moderator:
Another mystery in the overseas made scope world. Looks like as Asian made scope, and some Japanese, Taiwanese scopes were pretty good back in the day. Some were not. Fixed powers, OK, Variables, roll the dice.
Any markings on the underside of the turrets? Some will be marked "Made in Japan, South Korea, Taiwan" etc. If not marked (and preferably Japanese), i would replace it.

Looks like a nice Pre-64 Winchester 70 in a classic caliber.

Have been through a lot of used rifles, some with decent scopes that worked, some with good brand names that failed after 40-50 years of use.
If you wish, I can take a look at it.
I am local.
Mandeville is 30 minutes away.
PM me if interested.
 
Congratulations on acquiring a nice Model 70 in .300 H&H. Unfortunately the scope doesn't appear to be in the same league as the rifle. A brand that no-ones heard of. Has the look consistent with the early cheap Chinese scopes. It may work or it may not, but I think you'd be happier if you replaced it with scope of known quality.
 
Myself I’d pull it and put a reputable scope on.

That said I’m betting it’s a Japanese made scope from the early 60s and most of them are even still solid today although they’re not gas purged.
 
Congratulations on acquiring a nice Model 70 in .300 H&H. Unfortunately the scope doesn't appear to be in the same league as the rifle. A brand that no-ones heard of. Has the look consistent with the early cheap Chinese scopes. It may work or it may not, but I think you'd be happier if you replaced it with scope of known quality.
Thanks.

I won't be leaving the scope on the rifle; just curious about its provenience. I did put a few rounds through the rifle and the scope was well-zeroed and had good clear glass.

Thanks, again.
 
Another mystery in the overseas made scope world. Looks like as Asian made scope, and some Japanese, Taiwanese scopes were pretty good back in the day. Some were not. Fixed powers, OK, Variables, roll the dice.
Any markings on the underside of the turrets? Some will be marked "Made in Japan, South Korea, Taiwan" etc. If not marked (and preferably Japanese), i would replace it.

Looks like a nice Pre-64 Winchester 70 in a classic caliber.

Have been through a lot of used rifles, some with decent scopes that worked, some with good brand names that failed after 40-50 years of use.
If you wish, I can take a look at it.
I am local.
Mandeville is 30 minutes away.
PM me if interested.
Thanks. Nothing under the turret caps.

I'm just curious about it. Don't plan to leave it on the rifle.
 

Forum statistics

Threads
66,959
Messages
1,483,811
Members
143,227
Latest member
DuanePritc
 

 

 

Latest profile posts

Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
Golden wildebeest cow cull hunt

swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is [redacted]. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray [redacted]

Reply with name/address and I'll get a check into tomorrow's mail.
Boela wrote on Slider's profile.
Good day, Slider.

Do you by any chance have any 500NE brass left that you are willing to part ways with?

Best regards,
Boela Bekker.
 
Top