Fill this Rifle Gap

when you use your 22 at 200 yds are you shooting offhand? high power comp the 1st stage was 20 shots at 200. I am like you all my center fire guns are all figured out.
@wolfhunter
Not that good old son
Just off the bench and field positions like sitting and standing supported.
No comps just for fun and to improve my skills.
Bob
 
@wolfhunter
Not that good old son
Just off the bench and field positions like sitting and standing supported.
No comps just for fun and to improve my skills.
Bob
I havent shot any matches for almost 20 years. But it give a person a lot of shooting practice,200 300 600 yds some 1000 yds my favorite was 300 yds rapid fire.
 
I havent shot any matches for almost 20 years. But it give a person a lot of shooting practice,200 300 600 yds some 1000 yds my favorite was 300 yds rapid fire.
@wolfhunter
I prefer shooting for fun as the only one I have to beat is me. It can be hard beating yourself at times.
No smart arse comments from others with dirty perverted minds. I know what y'all are thinking
Bob
 
So I had settled on two Swedes for my boys, and a 7x57 for myself. I just picked up a 1908 Brazilian with most of the work done already, so now I’m back to the drawing board!
 
So I had settled on two Swedes for my boys, and a 7x57 for myself. I just picked up a 1908 Brazilian with most of the work done already, so now I’m back to the drawing board!
I’ve got a 1908 barreled action if you need another ….
 
Well this showed up in the mail today, looks like I’m adding this to the list as well!
IMG_0323.jpeg
 
Very nice.
Need to check the brass is boxer primed, Berdan can be used but is a pain
Gumpy
How do I do that.

Without shooting or pulling a bullet
 
How do I do that.

Without shooting or pulling a bullet
Ahh, for some reason I thought it was just brass, not loaded ammunition. It may say on the box, or if you can get clear access to the edges of the primer pocket you can measure it, will be different to boxer pocket. Old kynock will be berdan primed, not sure on the new stuff ( if the company that took it over still makes any), may need to make some out of 30-06 to start with
Gumpy
 

Forum statistics

Threads
68,676
Messages
1,528,036
Members
156,039
Latest member
Robyn14E60
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top