Custom 460 weatherby

I will say that I was pleasantly surprised by manageable it is especially after the past 2 years of reading more and more into the 460 and in the back of my mind I was starting to get a little worried and thinking that I may have made a mistake but that all went away after my 1st shot and then the 2nd and by the time I was 20 rounds deep all my fears went away
But you're shooting it with the brake attached, right? Do you plan to hunt with it that way? Big difference in recoil when the brake is removed.
 
Very nice. A CZ 550 action worked over by a good gunsmith is an excellent rifle. Please share more details of the build.

Regarding reloading, if you choose, BPI Shot Buffer is a great choice to make consistent, lower pressure loads, in the large Weatherby case, 500 grain bullets at 2150, aka. 458 Win Mag. Then work up from there to your recoil tolerance.
Doesn't the buffer get mixed up with the powder, or does it not make a difference?
 
Any kind of over-powder wad like a Cut-Rite wax paper, single thickness, cut with hole punch,
will keep a granular filler from mixing with the powder.
I would prefer just using 5/8"-diameter caulk backer foam rod from the hardware store.
Slice it into little cylinders with your filet knife on a cutting board.
Cram it in with a wooden pencil's eraser end.
It vanishes on firing.

Who cares if the .460 Wby shooting like a .458 WinMag kicks more because of the greater powder charge required to do it ?
That is the whole reason for the .460 WbyMag, just for kicks.
 
I will say that I was pleasantly surprised by manageable it is especially after the past 2 years of reading more and more into the 460 and in the back of my mind I was starting to get a little worried and thinking that I may have made a mistake but that all went away after my 1st shot and then the 2nd and by the time I was 20 rounds deep all my fears went away
@CO_mtnman
You are a better man than me Gunga Din. After three full power factory loads out of a MkV without a muzzle brake I was cured if ever wanting one
Bob
 
@CO_mtnman
You are a better man than me Gunga Din. After three full power factory loads out of a MkV without a muzzle brake I was cured if ever wanting one
Bob
I have them downloaded to 450 dakota/rigby velocities so I am sure there is a huge difference between the big rigby and a full power weatherby lol
 
@CO_mtnman
You are a better man than me Gunga Din. After three full power factory loads out of a MkV without a muzzle brake I was cured if ever wanting one
Bob
Always enjoy a Kipling quote. ( even if there is a slight mis-quote there)
anyway, that’s a nice rifle, I’ve never shot one, although I probably wouldn’t have a shot myself, these days my 458and 404 are about as punishing as I want to take. But at least with the big case you can download it to "soften the blow".
gumpy
 
I have them downloaded to 450 dakota/rigby velocities so I am sure there is a huge difference between the big rigby and a full power weatherby lol

I do that too, and the cartridge 460 Weatherby Magnum certainly delivers at least a muzzle velocity of around 2400 fps with a 500gr bullet, which the other cartridges caliber 458, except maybe the cartridge 450 Rigby, promise but rarely deliver. I used initially the old ammunition from Weatherby, which promised with a 500gr bullet a muzzle velocity of 2700 fps. The recoil, especially in a rifle without any recoil-reducing device, was very strong and certainly contributed to the bad reputation of the cartridge. Maybe you could have gotten used to it, a lot of big bore rifles have a strong recoil, but the precision was not excellent and in Africa, in a hot climate, there were clear signs of overpressure. I have never used this ammunition for hunting. Good factory loads are nowadays also loaded around 2500 fps at the muzzle for a 500gr bullet.
 

Forum statistics

Threads
68,297
Messages
1,518,366
Members
152,333
Latest member
luck81rucom
 

 

 

Latest profile posts

Paul K wrote on cgdemakis's profile.
My apologies for any grief that I may have caused you. I now have a pit in my stomach and I'm really pissed off and embarrassed. I feel that I have been made a fool of.

Please accept my apology.
Paul
CJNJ wrote on UNTAMED KNIVES's profile.
Still possible to order one of these?
ghay wrote on Floridanative's profile.
Hello,
I might be able to help you out depending on how many you need. I could probably spare 50-75 .285g A-Frames. They are factory pulls that look like new. Let me know if you are still looking,
Thanks,
Gary
blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
 
Top