Bedding

grumpy

New member
Joined
Jun 19, 2010
Messages
10
Reaction score
0
Member of
Blesbok club
I have a 30-06 full glass bedded. I would like to do this over and have a free floating barrel. If it is not too difficult I would like to do this myself. If it is too difficult and complicated I will have to have it done.
Any advice if it is a good choice and if I can do it myself?

I live in Gauteng, SA
 
If your planning to reutilize the glass bedded stock then this may be "too much trouble". Bedding the action of a rifle into a new or different stock is a snap compared to the pain of whittling out a bunch of resue ina stock channel.
 
grumpy

I have free-floated barrels on several rifles over the years and prefer it to glass bedding. I have free-floated one barrel that was previously glass bedded and may be able to supply some advice. Can you post pictures of the barrel channel and action inletting of the stock with the barrel / action removed?

- browningbbr
 
Hello
You can do whats called a skim coat glassbed job and also free float the barrel at the same time. Its a simple process but does your rife shoot well with a free floated barrel some dont! A way to see if your rifle shoots well with a free floated barrel is as follows. 1 remove barreled action from stock place match book shims under the action(it dont take much). reinstall barreled action in stock(dont over tighten screws 60 inlbs at most). Now check that the barrel is free floated,if its not more shims are needed. Once you have your barrel free floated shoot some ammo that you know is accurate in your rifle then you will know if your rifle likes to be free floated or needs a bit of barrel pressure. Hunting wieght rifles with slim barrels do need a pressure point more often than not.
Bart
 

Forum statistics

Threads
68,150
Messages
1,515,081
Members
151,012
Latest member
HermineFer
 

 

 

Latest profile posts

blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
LRich wrote on Andrew62's profile.
Andrew, I commented that your on 375 H&H for sale was the fair price.

Like I commented, my classic stainless has the original 24” barrel.

Did you buy yours with the barrel already cut down to 21” or did you do it (or a gunsmith)?
Zim Fan wrote on Charlie64's profile.
You might have edited your post on the PH in the Bubye. I know the PH and is a wonderful person and a fmaily man and runs a succesful business in Zim and just doesn't want the attention that the internet offers, the ugly kind.
 
Top