9.3x74R Brass

[Raptor59]

I’m interested to hear from members about the need for 9.3x74R once fired brass. How hard is it to locate and are members in need of some.

 

[The35Whelen]

I’m interested to hear from members about the need for 9.3x74R once fired brass. How hard is it to locate and are members in need of some.

I'd buy some if you're parting with it. Thanks!

 

[AZDAVE]

What is the make of the brass?

 

[Raptor59]

Working on acquiring a source of Norma brass. I will keep everyone apprised. Trying to get a handle on people’s need/demand.

 

[mgstucson]

Depending on price, I might be interested in a few hundred. I use mostly RWS or Norma is also great.

 

[Paul K]

I also would be interested, depending on price of course.

 

[Clifford Johnson]

Interested, depending on price.

 

[Raptor59]

I have initially ordered 100 pieces of once fired brass. Once i have received them and evaluated that they are indeed once fired and in great shape I intend to deprime, stainless steel pin wash and potentially anneal. I have an AMP annealer and would just need to pick up the pilot. I will keep everyone up to date on my progress. My objective is to try and keep the sales price in the $1.50 range.

 

[raamw]

I have both new and once fired brass make me an offer

 

[Raptor59]

I received the first 100 pieces of Norma brass today. They are indeed in great shape and once fired brass. I am going to get them deprimed and wet stainless tumbled over the weekend. I will post some pictures when they are cleaned up.

 

[Raptor59]

I apologize for the delay in getting back to this thread on the Norma 9.3x74R brass. Since my last post on May 3, 2025 my wife had the unfortunate luck to slip and fall on her right shoulder in our bathroom. She did some pretty good damage to her right rotator cuff and required surgery. Needless to say she and I have been busy with her initial recovery.
In between my nursing and driving to the doctor, I have finally been able to process 500 pieces of Norma 9.3x74R brass… deprimed, wet stainless steel tumbled and a final vibratory tumble. I currently have them bagged in 100 piece ziplocks with an additional 3 pieces bagged separately. The extra three are to setup sizing/trim dies.
I have each 100+3 bundle priced at $162 shipped (shipping runs $12 for 50 or 100 pieces). Payment by USPS money order, PayPal Friends and Family or Venmo (your choice). I will contact each individual in the order they expressed an interest in purchasing some. I am going to limit sales to one set per person until each individual has an opportunity to acquire some brass. If there is any left over and someone wants more I will PM you back before I ship an initial order. If you have any questions, please feel free to comment or PM me.

 

[teklanika_ray]

I would be interested in some as well.

 

[aquinn]

I would like one bag of 100 pieces

 

[Raptor59]

100 sold to teklanika_ray and 100 to aquinn.

 

[Raptor59]

I have 100 pieces of brass left.

 

[teklanika_ray]

Ill take the brass if it is still available

 

[Raptor59]

Sold and shipped to to Ray. Current batch of 500 pieces are all sold.

 

[teklanika_ray]

Sold and shipped to to Ray. Current batch of 500 pieces are all sold.

And I thank you very much for it sir, man this is beautiful brass.