.470 light loads

Gareth flanged

New member
Joined
Jul 7, 2018
Messages
13
Reaction score
17
Media
2
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues
 
Take a look at the Lyman Cast Bullet Hanbook. It will give you an idea of what’s possible with other cartridges.
 
I would think that you could approach this from the other end (history wise anyway) and look at what smokeless loads the 500/450 magnum shooters are using.
H4198 with a backer rod filler is where I would start.
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues.

You’d be surprised, I used to take my .470 regularly to an indoor rifle range and was approved by management.
 
don’t misunderstand me…I think it’s awesome you can shoot a 470 in an indoor range…I just can’t…have to go to my farm
 
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G

As others have mentioned, I would go with 4198 and a foam filler. You likely won’t be able to get down to 700 ft-lbs without nearly filling the case with foam, and I’d be worried about bullets getting stuck in the barrel at that speed. Stick to around 1500 to 1700 fps and lead bullets or jacketed pistol bullets.
 
Your bigger issue will be regulation. It is unlikely a load that light will regulate properly.
 

Forum statistics

Threads
63,536
Messages
1,397,747
Members
124,785
Latest member
HesterHein
 

 

 

Latest posts

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top