.470 light loads

Gareth flanged

New member
Joined
Jul 7, 2018
Messages
13
Reaction score
17
Media
2
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues
 
Take a look at the Lyman Cast Bullet Hanbook. It will give you an idea of what’s possible with other cartridges.
 
I would think that you could approach this from the other end (history wise anyway) and look at what smokeless loads the 500/450 magnum shooters are using.
H4198 with a backer rod filler is where I would start.
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues.

You’d be surprised, I used to take my .470 regularly to an indoor rifle range and was approved by management.
 
don’t misunderstand me…I think it’s awesome you can shoot a 470 in an indoor range…I just can’t…have to go to my farm
 
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G

As others have mentioned, I would go with 4198 and a foam filler. You likely won’t be able to get down to 700 ft-lbs without nearly filling the case with foam, and I’d be worried about bullets getting stuck in the barrel at that speed. Stick to around 1500 to 1700 fps and lead bullets or jacketed pistol bullets.
 
Your range limits you to 700 ft-lb muzzle energy cartridges?
 
Your bigger issue will be regulation. It is unlikely a load that light will regulate properly.
 

Forum statistics

Threads
66,430
Messages
1,469,499
Members
140,769
Latest member
EmeryConne
 

 

 

Latest posts

Latest profile posts

Been away for a while, glad to be back
A Frame66 wrote on Marcus bock's profile.
Hi Marcus
I'll 2nd limcroma! Booked 2nd trip at SCI last week. Those guys are great. Trying to get hooked up with Peter when he gets to the states if I can break away.
roklok wrote on SkullKeeper's profile.
What sling studs do those swivels fit ? They look to be quite a bit wider than the standard modern swivels. They may be just what I need for my Remington 30 Express wide swivel studs. Can you measure the pin diameter ?
Safari Dave wrote on Boardwalk72's profile.
Do you know where your .240 Weatherby was manufactured?
Culling old sable cow with bow!

 
Top