.470 light loads

Gareth flanged

New member
Joined
Jul 7, 2018
Messages
13
Reaction score
17
Media
2
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues
 
Take a look at the Lyman Cast Bullet Hanbook. It will give you an idea of what’s possible with other cartridges.
 
I would think that you could approach this from the other end (history wise anyway) and look at what smokeless loads the 500/450 magnum shooters are using.
H4198 with a backer rod filler is where I would start.
 
My experience is you would be exceeding any indoor range caliber constraints with a 470. Second you must be a reloader to do what you are attempting. If so your filler would take care of any capacity issues.

You’d be surprised, I used to take my .470 regularly to an indoor rifle range and was approved by management.
 
don’t misunderstand me…I think it’s awesome you can shoot a 470 in an indoor range…I just can’t…have to go to my farm
 
Hi

I'd like to use my .470 in the indoor range. I'd need a light loads with a soft lead bullet about 700 ftlbs.
Does anyone have experience of such a thing?
I'm wary of the case powder capacity.

G

As others have mentioned, I would go with 4198 and a foam filler. You likely won’t be able to get down to 700 ft-lbs without nearly filling the case with foam, and I’d be worried about bullets getting stuck in the barrel at that speed. Stick to around 1500 to 1700 fps and lead bullets or jacketed pistol bullets.
 
Your bigger issue will be regulation. It is unlikely a load that light will regulate properly.
 

Forum statistics

Threads
62,727
Messages
1,377,763
Members
120,921
Latest member
LynwoodBow
 

 

 

Latest profile posts

DaBill wrote on liam375's profile.
This is Bill from Arizona. If you still have the DRT's I would like to have 3 boxes
Let me know about pmt.
Thanks
teklanika_ray wrote on SP3654's profile.
I bought a great deal of the brass he had for sale, plus I already had many hundred rounds.

How much brass are you looking for?

Ray H
DaBill wrote on Green Chile's profile.
Hi Green Chile, I just recently bought a 470 NE barrel for my Thompson Center TCR 83-87 single shot. Im just looking for some 470 NE to shoot at the range just to try it out. I dont need anything special but I just wanted to see what you have left. I dont necessarily even need a full box.
Thanks
Bill
Harleydav wrote on raamw's profile.
Hello Do you still have 50 new 458 win mag brass for sale and are they hornady ?
 
Top