.375/270 grain/A-Frame

Underdog75

AH member
Joined
Jan 5, 2017
Messages
16
Reaction score
10
Can someone please tell me what the maximum charge of Reloader 15 is for a 270 gr. Swift A-Frame in a .375 H&H?

COAL would be handy too.
 
The Swift Reloading Manual #2 list 71.5gr RL15 as max and they only reference the standard 3.60" coal.
 
When I load A-Frames I take advantage of the cannelure to crimp. So I try to use brass that has been trimmed to similar lengths and let the COAL be set by the cannelure.

As to maximum charge of RL15, I wouldn't trust any number that someone gave me to the point of going straight to that charge.

Here is a link to Alliant and some info there for a different bullet. I would start well below the amount shown and work up.

http://www.alliantpowder.com/reloaders/powderlist.aspx?type=1&powderid=12&cartridge=102
 
dchamp - Thanks for the quick response. Very much appreciated.

Phoenix Phil - Agreed on the cannelure and not going straight to MAX. Reduce and work up. The Alliant page lines up with what Swift states. Swift Max = 71.5 and Alliant shows max with a 270 Speer at 71.

Anybody have a pet load for that bullet and powder combination that they want to share?
 

Forum statistics

Threads
64,700
Messages
1,425,079
Members
132,132
Latest member
IsabelGqh6
 

 

 

Latest posts

Latest profile posts

gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
 
Top