.333 Jeffery reloading data

[Piet-Vis]

Good Day All

I would appreciate any leads on where I can find reloading data for the 333 Jeffery

 

[Josh P]

Page 277 of the Woodleigh Bullets Loading Manual. (I'm not sure if they mind posting photos of the data or not.)

 

[Ray B]

If you have at least one empty case, seal the flash hole with a fired primer, then weigh the case. Fill the case with water to what would be the base of the bullet. Reweigh the case with water. Subtract the weight of the empty case to determine the weight of the water. Post the weight of the water and the weight of the bullet you intend to use. If you post the effective barrel length (distance from bullet base to muzzle) I or someone else can run the numbers with a Powley Computer or similar electronic program and post the result.

 

[Piet-Vis]

If you have at least one empty case, seal the flash hole with a fired primer, then weigh the case. Fill the case with water to what would be the base of the bullet. Reweigh the case with water. Subtract the weight of the empty case to determine the weight of the water. Post the weight of the water and the weight of the bullet you intend to use. If you post the effective barrel length (distance from bullet base to muzzle) I or someone else can run the numbers with a Powley Computer or similar electronic program and post the result.

Thanks Ray! I will come back to you when I have everything in place

 

[Desperatezulu]

If you have at least one empty fired case, seal the flash hole with a fired primer, then weigh the case. Fill the case with water to what would be the base of the bullet.

Fill to mouth of the empty fired case if you wish to use the case capacity data for QL, GRT etc.

 

[Piet-Vis]

Fill to mouth of the empty fired case if you wish to use the case capacity data for QL, GRT etc.

Thanks, I learn every day...

 

[Ray B]

etc.

etc does NOT include the Powley Computer. It specifically uses the measure of powder capacity which is to the base of the bullet.