Suppressors off the NFA list!

The run on suppressors will be massive in Texas alone; I'm going to wait until the demand calms down.

I remember when the gun scares started after Obama, it seemed like over night quality control went to shit and it took years to come back.

@Mark Biggerstaff ..... Does this also mean all the "pistol brace"/SBR bullshit is dead as well?
 
Last edited:
I will say this. We did not start selling any today without the standard as always form 4 being submitted. Two other shops here did same as us. One close by in about 40 miles of us did. Heard they sold over 150 today.
We are waiting on more clarification! There are restrictions on how they were acquired to be transferred under this new plan. Also trusts are not accepted its individual purchase.
I have spoken with several dealers in my area as well and they are all continuing with the form 4's until more clarification is given. I bought 8 online from Capital Armory and they are also continuing to use the form 4 for now.
 
I picked up a Lyman Skarv (rimfire suppressor) recently. Im actually going to shoot it for the first time tonight.. Im excited to see how it stacks up against my buddies award winning titanium can..

Most of the reviews Im seeing on the Rekkr and the Paradox 30 cal cans are sort of middle of the road.. theyre not nearly as quiet at a host of $800-$1500 30 cal cans out there.. but.. Midwest Gunworks had the last round of Rekkr's priced at $279... for $279 Im more than happy to have an "average" performer.. All Im looking to do is strap it to a hunting rifle and improve performance... if its even half as good as I think it will be, I plan on buying 3 of them and putting a dedicated unit on different rifles.. I figure I can buy 3 for the price of 1 other unit.. in for a penny, in for a pound lol.
That's where I am with it. For under $300 to have a basic can is all I want for hunting from a 4x8 box. I'm taking 1, maybe 2 shots. 3 if theres a big group of hogs and I work the bolt fast and they take the long path for prolonged exposure. I don't like wearing "ears" when hunting, I want to hear nature and the activity.

I can buy more advanced units for volume shooting if needed.
 
Just curious, Are you processing all models this way, or specifically the ones named as plaintiffs?

And do you sell the Lyman ones? I know myself and mdwest have been keeping eyes out for the Rekkr unit.
No Lyman available, Silencer Shop is out, we did not have any on hand
All ours came thru or go thru Silencer Shop

Form 4 is not an option thru Silencer Shop any longer.
What I understand from Silencer Shop is any purchases in one of the Free States will be no Form 4 done on.
 
To that point, I encourage you all to join GOA so in the unfortunate event you're being prosecuted "Bigly" you at least can claim you are part of the named party class subject to the suit.
In the joined case, Jensen v ATF, being a member of the Texas State Rifle Assoc. or Citizens Committee for the Right to Keep and Bear Arms would also suffice. Even if not a member of any of the groups involved, it is my understanding (not a lawyer) that customers of named dealers are also covered. Thus, it might be more important to have the dealer covered than be a member of an organization.
 
That's where I am with it. For under $300 to have a basic can is all I want for hunting from a 4x8 box. I'm taking 1, maybe 2 shots. 3 if theres a big group of hogs and I work the bolt fast and they take the long path for prolonged exposure. I don't like wearing "ears" when hunting, I want to hear nature and the activity.

I can buy more advanced units for volume shooting if needed.
If I manage to get my hands on one before you do, we’ll link up and you can shoot it and see what you think..,

I’m on a “notify me” list at probably a half dozen different places.. the minute I get an email from one of them I’m going to buy at least one… or may take my chances and just buy deep and get 3
 
What will be interesting is to see what a top, top of the line suppressor costs in a year. The reality is that no suppressor is worth $1000, the very best ever made was worth maybe $400 as a machined part. The bureaucracy, gun trusts, serialization, storage pending approvals, slow turn on inventory, expanded warehousing to hold pending transfers, BATF processing, that is where the remaining $600 in MSRP was coming from.

I predict the market caving in. When a guy can make 10,000 units and sell every one of them at a gunshow for a fist full of cash and zero paperwork, the prices will surely come down a lot.
From your lips to God's ears. That's what I'm waiting on. I was on Silencer Central this morning at about 0530, didn't figure I'd see any movement on price yet, and there wasn't.

I'd like their 46TI for my 404J and 9.3x62, but they already have a 24" and 22.8" barrels, prolly would need to cut them down a bit. And my 1895 GBL. I'd just have to get somebody to shorten the mag tube and move the dove tail notch back an inch or 3.

Radical Firearms is only about 15 minutes from me, my neighbor is friends with the owner. Might try to get something from him, but they 3D print all theirs. Not sure I need an inconel silencer, tho.
 
Why? Concern over a reverse on the new ruling? Or just prefer a trust?
prefer trust, still uncertain as what can happen taking out of state and overseas.
We also decided to stop form 4473 transfers and back to Form 4 only out of some concerns involving what suppressors are eligible and what is not. Also there is no provision for a dealer to remove existing silencers in his form 4 inventory log to show they are sold and transferred. Plus some other things our ATF guy told us I am not at liberty to say publicly
 
Why? Concern over a reverse on the new ruling? Or just prefer a trust?
In my case, it is because NFA items including suppressors are only legal if registered under a Form 4 or 1.

North Carolina law (GS 14-288.8) must change before I can do a mere 4473 transfer. That law considers suppressors aka mufflers as "weapons of mass destruction." Go figure.
 
I’ve watched several videos regarding sales in Hueytown Alabama. Apparently this dealer is allowing purchases without form 4. I have no seen or heard of anyone else in Alabama. Maybe others have.

I’m curious to how this will play out over the next several weeks.
 
I would recommend waiting until this all settles...
 

A big win for 2A, US hunters/shooters. Long overdue in my opinion. Still about half the states have local regulations, but in 27/50, today you can walk in and buy a suppressor just as you would a firearm and take it home.
It was nice to walk in and just pick up the one I ordered from silencer shop. Even in communist Minnesota.
 
Anything new cooking on the NFA/Form 4 front for suppressors?

Most shops in New Mexico still require the form 4 process (pending ATF guidance...."who knows when"), but Silencer Shop lists two that transfer using a 4473.

How are the gun stores in Free Texas leaning? Are we expecting ATF guidance anytime soon?
 
I don’t expect anything from them. They cannot even pass a bill in senate to stop the crazy daylight savings changes…..something everyone wants, much less changing anything gun related
 
If removed form the NFA, they would still be in compliance with federal law, as are other non-NFA items.
 
Watching this thread with interest.

@jpr9954 "North Carolina law (GS 14-288.8) must change before I can do a mere 4473 transfer. That law considers suppressors aka mufflers as "weapons of mass destruction." Go figure."

Well in NC I guess that means you will need to remove the mufflers off all the cars and trucks so you aren't carrying "weapons of mass destruction" around; just taking logic to the next level.:A Stirring:

Wish I had thought of that as a kid, the local law enforcement loved stopping me in my Chevelle SS for loud glass packs.:eek::Angelic:
 

Forum statistics

Threads
70,437
Messages
1,576,225
Members
170,536
Latest member
KAOLavina1
 

 

 

Latest profile posts

Hornedfrogbbq wrote on Rhoyland4's profile.
Do you mind me asking what auction you are referencing? I'm not in the market for any of those rifles...just curious.

Frosty in Fort Worth
K_P wrote on Buckleyguy12's profile.
Good morning from Montana.

I'm looking at a post from 2018 where you were looking for a lefty Winchester in .375 H&H Magnum. I'm selling mine. My email is [redacted] in the event that you're still searching for a unicorn.

Best,

Kelly Palmer
Gents, if you book and pay your deposit before the end of this year , you can have the bigger cull package for the 2026 price! https://www.africahunting.com/threa...griffiths-safaris-starting-at-us-2-560.96285/
I am currently in Northern Cape scouting a hunting area, we will have lots of amazing hunting opportunities for 2027! I will post updated available dates soon!
 
Top