CurtisDees
New member
- Joined
- Apr 29, 2025
- Messages
- 13
- Reaction score
- 14
Want to buy 9.3x62mm dies i am in tucson az 520-696-0834 thanks Curtis
World's most popular community & resource for hunting in Africa since 2007
Looking for 9.3x62mm reloading dies
- Thread starter CurtisDees
- Start date
I bought a 550 American in 9.3x62 from a board member. I have a 550 Safari Mag in Rigby as well.
There has been lots of nasty comments about both the LUX and American stocks. The LUX stock seems to really need some adjustment of angles to properly deliver high recoil to the shoulder properly. Shooting one 416 with and one without the changes is astonishingly different.
The American stock on the 9.3 shoots very well. Recoil seems minimal and the rifle shoots very well ... so I would not be afraid of buying one.
The 9.3 seems to be very easy to load for. the board member recommendations have been strong for H414 and for RL-15. I had some RL-15 and so used it. First load was a mid range load with Speer 270s just for cheap deer ammo. Even having no experience with this rifle, it printed around an inch at 100 and I could actually tell when I had one that would be out a little. Recoil was moderate, and noise is not bad at all.
Am very pleased with the 9.3. Have fun with yours!
There has been lots of nasty comments about both the LUX and American stocks. The LUX stock seems to really need some adjustment of angles to properly deliver high recoil to the shoulder properly. Shooting one 416 with and one without the changes is astonishingly different.
The American stock on the 9.3 shoots very well. Recoil seems minimal and the rifle shoots very well ... so I would not be afraid of buying one.
The 9.3 seems to be very easy to load for. the board member recommendations have been strong for H414 and for RL-15. I had some RL-15 and so used it. First load was a mid range load with Speer 270s just for cheap deer ammo. Even having no experience with this rifle, it printed around an inch at 100 and I could actually tell when I had one that would be out a little. Recoil was moderate, and noise is not bad at all.
Am very pleased with the 9.3. Have fun with yours!
CurtisDees
New member
- Joined
- Apr 29, 2025
- Messages
- 13
- Reaction score
- 14
Thank you it sounds great
Midway USA
www.midwayusa.com
RCBS 9.3x62mm Mauser Full Length Sizing, Bullet Seating 2 Die Set
RCBS has been making some of the best reloading equipment for over 60 years. These steel, 2-Die sets are known in many reloading circles for their...
www.midwayusa.com
CurtisDees
New member
- Joined
- Apr 29, 2025
- Messages
- 13
- Reaction score
- 14
Thank you
Members online
- SteveNZ
- jpg
- PANTHER TRACKERS
- Kevin Peacocke
- luger6
- bigborelover
- WesRic404Jeff
- Softballdad
- Woodcarver
- Sarg
- R eight
- Leadwood
- Lopehunter
- Jon Glajchen
- ert-rem
- randallhebert
- Zinz
- EBaker
- CBH Australia
- Warren Knudsen
- MRBlack
- BlueFlyer
- Peter Radekevich
- mm88directory
- yumastepside
- Carnivore hunter
- KIH
- FlowHamed18
- Grumpy gumpy
- Csnakes03
- Ray B
- teklanika_ray
- Nkawu
- Aussie_Hunter
- JJoseph
- mneilh
- Merriman
- Ridge Runner
- UKHunter
- LaureneRpi
- Major Bonkers
- Tanks
- Kiwifire111
- rigbymauser
- mark-hunter
- Jeff505
- MATTANJA HUNTING SAFARIS
- Piet Brood
- DieJager
- uplander01
Forum statistics
Latest profile posts
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?
Thank you Ferenc
Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689
If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.