Interest recommendations on the use of two-blader broadheads on Crossbow.

[kristian55]

Interest recommendations on the use of two-blader broadheads on Crossbow.
Thank you for an answer.
P.S.
This type
German Kinetics Broadheads

 

[TOM]

I was going to suggest those exact heads. The Silver flames are awesome. Are you sure you want a two blade?

 

[enysse]

I have no problem with 2 blade broadheads, but would recommend a 3 blade instead. Why? You get more surface area covered on a shot. A 2 blade might penetrate better but a 3 will do more damage in the long run.

Just my two cents.

 

[kristian55]

I was going to suggest those exact heads. The Silver flames are awesome. Are you sure you want a two blade?

I am ready to hear out Your opinion and suggestion.
I like to collect information from wise people.
Thank you for an answer.

 

[NUys]

Two blader broadheads on crossbow.

I do agree with Enysse on the cutting damage on a three blader and over longer distances two bladers tend not to be as accurate as three bladers. They tend to fly more than a three blader.

 

[kristian55]

I have no problem with 2 blade broadheads, but would recommend a 3 blade instead. Why? You get more surface area covered on a shot. A 2 blade might penetrate better but a 3 will do more damage in the long run.

Just my two cents.

Simply I agree with you in relation to penetration of 2 blade broadheads - it 100% effect!
However ballistics of flight of arrow with 2 blade broadheads,3 blade broadheads and 4 blade broadheads considerably differ at crossbow and bow.
P.S.
enysse-I value Your opinion and advices.

 

[TOM]

Zwickey's are good as well. Lots of different weight options.

 

[enysse]

What broadheads do I like?

I like Thunderheads, Muzzy, G5, Rage....to name a few. I like no more that 1 1/4 width with cut on 125 grain broadheads and 1 3/16 for 100 grain broadheads. There are a lot of great broad heads out there.

 

[kristian55]

Zwickey's are good as well. Lots of different weight options.

Thank you TOM for an answer.

 

[kristian55]

I like Thunderheads, Muzzy, G5, Rage....to name a few. I like no more that 1 1/4 width with cut on 125 grain broadheads and 1 3/16 for 100 grain broadheads. There are a lot of great broad heads out there.

Yes,enysse.