.458 Win Mag powder

Here's a place to start- http://ns.hodgdon.com/extreme.html -I'd highly recommend using a powder within this group.

Then use a chronograph to work toward a reasonable velocity goal and pay attention to pressure signs like head expansion, primer flattening and stiff bolt lift.
 

Attachments

  • Screen Shot 2019-11-29 at 9.13.08 AM.png
    Screen Shot 2019-11-29 at 9.13.08 AM.png
    951.8 KB · Views: 208
  • Screen Shot 2019-11-29 at 9.13.09 AM.png
    Screen Shot 2019-11-29 at 9.13.09 AM.png
    954.1 KB · Views: 207
  • Screen Shot 2019-11-29 at 9.13.11 AM.png
    Screen Shot 2019-11-29 at 9.13.11 AM.png
    943.7 KB · Views: 204
I've tried them all...nothing impressive-always in the 2,000-2,150ish fps range (even w/ longer 450 gr Barnes bullets.) :( Traded in favor of the PERFECT .416 Chatfield-Taylor.
450 Barnes Ramshot TAC
73.5
2,178
4,742

500 Federal Ramshot TAC
67.0
2,083
4,819

I do recall the great Woodleigh bullets being the shortest, so try those with the max, compressed powder loads and you'll prob have slightly better success. Kevin Robertson is dead-on about this short mag's limitations. Use the 450 gr bullets to get the velocity up to the effective minimums. My son shot a buff with one once (after we got to within 20 yards!) ;) Ok as a stopping round, only because those sorts of distances are ok with it. (TAC is made by the same co. as Western, AA-all very similar, denser, more compressible grain-sized powders).
Off this topic, but what load data might you have for your .416 Taylor? I’m close to buying one and would appreciate your input? 350 and 400gr bullets. Thanks!
 
Accurate 2230
 

Attachments

  • Screen Shot 2019-12-03 at 10.09.32 AM.png
    Screen Shot 2019-12-03 at 10.09.32 AM.png
    640.3 KB · Views: 177
  • Screen Shot 2019-12-03 at 10.09.33 AM.png
    Screen Shot 2019-12-03 at 10.09.33 AM.png
    781.7 KB · Views: 189
I heard that some factory ammunition gets good velocity by either blending powders to a secret recipe, or using some kind of secret powder. Any thoughts on this?

I’m not too worried, I’ll cheerfully use 2206H and am happy with the results.

Manufacturers blend but they have the facilities to test for burn rates and pressure. Their blends are consistent.
If we start blending I can only imagine the disasters they would occur.
 
Rereading my post it sounds like I want to try it! Hell, no!

I figured that.
I couldn’t imagine anyone from AH being so stupid as to try it![emoji4]
 

Forum statistics

Threads
70,076
Messages
1,563,532
Members
166,860
Latest member
Esther46A4
 

 

 

Latest profile posts

migrabill wrote on Surgeon1's profile.
Be careful of this Wolfen guy. 2 messages. Both trying to sell something. He PM'ed me trying to sell something and he PM'ed my friend on here trying to sell something. Fishy.
Bright Path Acupuncture & Functional Medicine is a healing center that focuses on blending traditional acupuncture techniques with modern functional medicine practices. Their goal is to support patients in achieving optimal health by addressing the root causes of their health issues.
autofire wrote on Dr Ray's profile.
Hi Dr. Ray, I will be in Cooktown from Oct 16 to Oct 23 fishing Lizard Island Black Marlin Tournament.

I have several "slack" days after fishing before I head for stay in Sydney and Fiji.

Do you have any recommendations for 1 or 2 day hunt near Cooktown?

I've hunted both DG and PG in 4 different countries in Africa.
Thank you,
Bob
Alex Sniper wrote on Bynotic's profile.
Good morning. I see that you had a Sauer 202 for sale for $3,000. Did you sell it at that price?
I have one for sale as well. I listed it (on here ) at $3,000 as well. Is the price high, low or right where it should be?

Thanks. Alex. [redacted] in case you want to call me to discuss further. I appreciate your time help and support.
I broke my cherry, August 2026, 41" Cape, hooked for life.
 
Top