500 Jeffery Club

I've received correspondence from "one" domestic builder over the past 4 yrs that returned correspondence.
 
I'll try the Kynoch today. vs Norma 570 & 540 ?

why not, wth.
 
thumbnail (2).jpg
 
@Beck , etc.

That AHR is the finest Bolt I've ever known (I don't have a lot to compare by), however.
It was purchased 2nd hand, short in LOP, almost 10lbs, (underweight) but impeccably accurate, refined. @RR 314 can more so attest to Wayne's work.

The Sako, also 22" Barrel is 9lbs, ouch. I've only put 9 rounds before it was sidelined. It's also has a 14" LOP. "I'll find a stock comparison" It is incredibly handy. Really nice machine, others that actually worked with them would be a better judge.

This shows the size comparison between the Stocks,

comp.jpg

quite a difference
 
Last edited:
@Beck , etc.

That AHR is the finest Bolt I've ever known (I don't have a lot to compare by), however.
It was purchased 2nd hand, short in LOP, almost 10lbs, (underweight) but impeccably accurate, refined. @RR 314 can more so attest to Wayne's work.

The Sako, also 22" Barrel is 9lbs, ouch. I've only put 9 rounds before it was sidelined. It's also has a 14" LOP. "I'll find a stock comparison" It is incredibly handy. Really nice machine, others that actually worked with them would be a better judge.

This shows the size comparison between the Stocks,

View attachment 640522
quite a difference
Looking to sell the Sako?
 
The Sako 500 J is accurate, affordable and just a bit too light …However, it’s not too uncomfortable to shoot a half dozen rounds in a session.

The R8 PH in the photo is shown with her 416 REM Mag barrel. The 500J barrel is on order. I reckon it may be a bit more comfortable than the Sako.

I’m not sure that the term “comfortable “ is the best description. But it doesn’t hurt.

IMG_7266.jpeg
IMG_7265.jpeg
 
Last edited by a moderator:
I like to use the word "sporty" lol Wayne at AHR worked on my 500 Jeffery. It's got his single stage match trigger, 3 position M70 type safety, and bolt straightened and filled. He also smoothed out the action a bit. It's getting an ebony forend and grip cap, when I get it back I'll post an updated picture.
 
@Beck , etc.

That AHR is the finest Bolt I've ever known (I don't have a lot to compare by), however.
It was purchased 2nd hand, short in LOP, almost 10lbs, (underweight) but impeccably accurate, refined. @RR 314 can more so attest to Wayne's work.

The Sako, also 22" Barrel is 9lbs, ouch. I've only put 9 rounds before it was sidelined. It's also has a 14" LOP. "I'll find a stock comparison" It is incredibly handy. Really nice machine, others that actually worked with them would be a better judge.

This shows the size comparison between the Stocks,

View attachment 640522
quite a difference
Those Sako 85 stocks are terrible for recoil absorption. That picture pretty much sums it up.
 
Jeffery thinks that rifle should weigh about 11 1/2 lbs. At that weight recoil is quite manageable.
 
I don’t find the recoil in my sako bad at all. It’s 9.5 lbs. I also have 2 505s, one is 9.5 lbs and the other is 11.6 lbs and both have more recoil than the 500j.
 
I don’t find the recoil in my sako bad at all. It’s 9.5 lbs. I also have 2 505s, one is 9.5 lbs and the other is 11.6 lbs and both have more recoil than the 500j.
Same ballistics but greater powder charge contributing to that increased recoil I assume?
 
Same ballistics but greater powder charge contributing to that increased recoil I assume?
The AHR is 10 lbs, per say. I've never experienced a ss trigger like his. Even, short in LOP, & a lot attest it's underweight, it's still refined to be manageable in recoil & accuracy.

The Sako: It took a year & a half to arrive, I gave up after a while, then it showed up!
The intent was to add a slip-on pad & work with it or shelve it for possible sale or keep it flawless for what it is. The sleeves are marked 20/21.

Thanks for asking foremost, I certainly may be interested in selling:
sako box.jpg
 
The AHR is 10 lbs, per say. I've never experienced a ss trigger like his. Even, short in LOP, & a lot attest it's underweight, it's still refined to be manageable in recoil & accuracy.

The Sako: It took a year & a half to arrive, I gave up after a while, then it showed up!
The intent was to add a slip-on pad & work with it or shelve it for possible sale or keep it flawless for what it is. The sleeves are marked 20/21.

Thanks for asking foremost, I certainly may be interested in selling:
View attachment 640547
I personally don't believe a 11.5lb's is necessary & understand "it's not for everyone". I lost over two years (laid up) w/o shooting. @Altitude sickness, etc. helped critique, which takes time & a lot of practice.

Lost a lot of strength, but ran the AHR anyway,
600grn @ 2100fps
Norma 570
Norma 540
Kynoch 535

 

Forum statistics

Threads
63,595
Messages
1,399,417
Members
125,380
Latest member
JennyAbney
 

 

 

Latest posts

Latest profile posts

Screenshot 2025-10-09 at 7.53.47 AM.png
A two minute video I made of our recent Safari. I think it turned out well
Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
 
Top