Wanted Factory .458 Win Mag Ammunition

Dangerous Dave

AH senior member
Joined
May 16, 2022
Messages
73
Reaction score
66
Does anyone have any factory .458 Win Mag ammo loaded with 350 grain bullets they might wish to sell.
 
I've got about 15-20 of what I believe are reloads that will not chamber into my rifle that I would send to you for free. They look like the factory box of Federals 350s I have, but everyone (I've tried about 3) of them are tight near the belt on my rifle.
I got them in a package deal off Gunbroker last week.
 
I have some factory Hornady, Winchester and Federal Fusion. Its all 500 grain stuff. If your interested send me a PM. 350 loads will be difficult to find factory loads.
 
Not to derail from OP's initial thread too much, but @D.M.V nails it. I learned to reload due to acquiring a 375 one day. I think my initial uninformed purchases that I made to get rolling (including bullets, primers and powder) cost me about $800. IIRC, I made about 1k worth of ammo within a month or two. Paid for itself quickly.
 
Running a search on Ammoseek there's a fair amount out there ~5.50 and up for 500gr, then some at ~7ish at 400gr. But zero results for 350gr.

Edit: I should probably note that I checked @RAVEN ROCKS PRECISION as well, but nothing is showing in stock there --- but I'd still bookmark them for searches like this in future if you haven't already.
 
I agree reloading is defiantly the way to go. BUT reloading does require a bit of concentration and quiet. Two things that do not exists in my household.
 
I have a box of Federal Premium Safari with 350 grain soft points I'd take $100 shipped.
 

Forum statistics

Threads
64,560
Messages
1,421,823
Members
131,034
Latest member
KennyR816
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top