Thoughts on this action

Aixenmemphis

AH member
Joined
Nov 12, 2021
Messages
18
Reaction score
53
I’m rather new here and have been very interested in building a 404 J. I saw this on Gunbroker and it peaked my interest. I just wanted to see what you guys with much more experience thought about it.
 

Attachments

  • Screen Shot 2023-06-01 at 8.52.17 AM.png
    Screen Shot 2023-06-01 at 8.52.17 AM.png
    2.8 MB · Views: 218
  • Screen Shot 2023-06-01 at 8.52.20 AM.png
    Screen Shot 2023-06-01 at 8.52.20 AM.png
    891.5 KB · Views: 258
  • Screen Shot 2023-06-01 at 8.52.22 AM.png
    Screen Shot 2023-06-01 at 8.52.22 AM.png
    962.6 KB · Views: 243
Many would argue that’s the best m98 action ever made.
I’m sure other members with much higher expertise will tell you the same thing
 
@Aixenmemphis I have that one on watch, too! ;)

@gballard137 Are they much different than the Steyr Waffenfabrik actions? I've got a hand-me-down that was re-chambered to 7.62N from 7mm by the Chilean government. Shot it the other day and it didn't perform well... perhaps it's future could be the same as the aciton above?
 
I saw that action also, there is something about the rear bridge that does not seem right to me. Look closely at pictures 4&5 and zoom in. In picture 5 it looks like there is something going on between the 2 scope base screw holes. I do realize the charger hump has been ground off. In picture 4 the area of the bridge to the right of the bolt release lever does look strange. I would want the action in hand before I would plunk down the cash.
 
@Aixenmemphis I have that one on watch, too! ;)

@gballard137 Are they much different than the Steyr Waffenfabrik actions? I've got a hand-me-down that was re-chambered to 7.62N from 7mm by the Chilean government. Shot it the other day and it didn't perform well... perhaps its future could be the same as the aciton above?
Do you know when the steyr action was made?
Depends what cartridge you are going to chamber the rifle in will depend if the action is suitable
 

Forum statistics

Threads
68,614
Messages
1,526,606
Members
155,339
Latest member
Fanny3545
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top