David jr
AH senior member
- Joined
- Sep 12, 2025
- Messages
- 99
- Reaction score
- 172
- Location
- Regina New Mexico
- Media
- 3
- Member of
- Life NRA Life SASS
- Hunted
- United States
The recent model 70’s rear trigger screw will not go through action it has a stop.
The front action screw on all model 70’s has always been a complete pass through screw hole where the bolt lug can hit a protruding action screw .
Ran into this problem with a pre 64 super grade 300H&H I have owned for over 30 years
Stock shrank and bolt did protrude into locking lug race barley , all of a sudden my 300 went from sub moa to 6 inch moa
easy fix pillar bedded and shortened screw, free floated barrel .
I would have done this years ago but the rifle was a shooter with out touching anything I really wanted to keep it as it left the factory but some times it is better to fix problem and use as intended
The front action screw on all model 70’s has always been a complete pass through screw hole where the bolt lug can hit a protruding action screw .
Ran into this problem with a pre 64 super grade 300H&H I have owned for over 30 years
Stock shrank and bolt did protrude into locking lug race barley , all of a sudden my 300 went from sub moa to 6 inch moa
easy fix pillar bedded and shortened screw, free floated barrel .
I would have done this years ago but the rifle was a shooter with out touching anything I really wanted to keep it as it left the factory but some times it is better to fix problem and use as intended
