Show your Sharps!

Certus

AH fanatic
Joined
Aug 6, 2018
Messages
860
Reaction score
1,625
Media
1
Post up your Sharps here! And give a description.
Doesn’t have to be original, I just wanna see some classic American (or Italian repro!) single shots!
 
All three 45-70s, top two are Pedersoli bottom one is custom built

0726171414.jpg
 
Last edited by a moderator:
Original Model 1859 Sharps 52 caliber Infantry Rifle. Was typically issued to snipers, though toward the end of the war, the US Army was fielding veterans regiments which were to be armed with the Sharps rifle. Few were issued before the end of the war and only approx 11,000 total were produced.

sharps1.jpg

Sharps3.jpg

Sharps2.jpg
 
Hopefully within the next few days I'll have something to post here. Although it's not a Sharps. That's still on the table for the future but I found a contemporary cousin that I couldn't quite pass up...
 
Heck I'll share a listing photo or two...

I did a trade for this:
1716388721048.png


Is it a Sharps? No, and I still want one badly. But I like the Remington design too; it's a bit more sleek and has plenty of military and hunting pedigree of its own.

Plus here's the fun part:
1716388749016.png


(Except it's not NE. It's smokeless loads for .450 black powder express.)

With luck it'll be here by tomorrow...

~~W.G.455
 
There’s something very nostalgic about shooting Buffalo guns, Lever guns and Single action revolvers. Hunting with them too. Also have similar caliber lever guns and many 1885 designs ( no Italians) in all the “Sharps Rifle Calibers”. A repeating 50-110 Lever gun, gets your attention, but nothing feels like an 1874 classic.
 
Last edited:
Heck I'll share a listing photo or two...

I did a trade for this:
View attachment 607420

Is it a Sharps? No, and I still want one badly. But I like the Remington design too; it's a bit more sleek and has plenty of military and hunting pedigree of its own.

Plus here's the fun part:
View attachment 607421

(Except it's not NE. It's smokeless loads for .450 black powder express.)

With luck it'll be here by tomorrow...

~~W.G.455
I don't want to corrupt this thread but I'm curious; how did you get a rolling block to accept a 3 1/4" cartridge? I have a 45-90 WCF rolling block and it barely accepts thar 2.4" cartridge.
 
I don't want to corrupt this thread but I'm curious; how did you get a rolling block to accept a 3 1/4" cartridge? I have a 45-90 WCF rolling block and it barely accepts thar 2.4" cartridge.
I've seen some chambered for .45-120 and for larger bore cartridges than a .45/.450. I suppose it just depends on the barrel and the action used.
 
Love Sharps rifles and any quality sporting single shot.

Shiloh Sharps 50-70, octagon to round (1 of 10 made in this configuration)
Dakota Little Sharps, octagon .38-55
Shiloh Sharps 45-70, octagon to round

IMG_7431.jpg


Not Sharps but 2 of my favorite vintage single shot sporting rifles...

Purdey .450 BPE on Alex Henry pattern with full rib
Alex Henry .451 percussion match rifle, Damascus barrel

IMG_7434.jpg
 
Thanks for posting guys,
Just interested in who’s got a Sharps rifle though!
Love how on the websites you can play around with builds and options. I like the .50-95 and .40-50 (opposite ends of the spectrum, I know).
Reckon if I did a .50 I’d make it a bit more optioned out, and the .40-50 I’d get with a round barrel and built lighter and plainer.
The .45’s make the most sense though.
 
Yes, MVA scope. They are THE best option for scoping a Sharps. Many variations on the MVA scope...length, magnification, etc.
 
The length at the end is basically like a sun shade. It just spreads out the length on longer barreled guns.you can remove the front sight dovetail and extend it to the end, with a longer extension
 
Length also has an effect on where you want the mounting blocks...gives you different options. All of the scope tubes are one piece.

Screenshot 2024-05-22 at 7.54.07 PM.png
 

Forum statistics

Threads
67,269
Messages
1,492,406
Members
144,757
Latest member
louesechdwick
 

 

 

Latest posts

Latest profile posts

channelkat wrote on NMAmateurHunter's profile.
FYI we need NM members! Please spread the word and join us if you can make it.
1775843806328.png
observe wrote on NZ Jack's profile.
Jerome, do you think my last post in rough camping must maybe shift as an article?
rayford445 wrote on Hunter-Habib's profile.
Good afternoon,

I'm trying to get in contact with Mr Butch Searcy. I have the opportunity to buy one of his rifles chambered in 577 nitro Express however the seller does not have any of the paperwork with the information about what ammunition or bullet weight was used to regulate it. I know he is not making firearms anymore but I wanted to reach out after seeing one of your post about him.
Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
 
Top