Sako 85 ejection issues

[Westerner1939]

Hi all, I’m considering buying a Sako 85 in 9.3x62. I’ve heard about the ejection issues and I’m a bit concerned, especially on a rifle in that chambering I’ll be using it to hunt black bears in brown bear country, things need to work. I’d prefer to have a low power scope mounted as low as possible which probably doesn’t help things.
Can anyone here chime in if this issue is overblown or should I pass.
Thanks

 

[375Fox]

There are a lot of threads on it here. I have no issues in my 300 win mag, but I have issues in my 270 win and 375 H&H. If you will be using a simple duplex scope, the solution is turn the scope 90 degrees counter clockwise. If you want to use a scope with dials or illumination button, it can be a problem. Medium rings solve the issue too, but not ideal for sight picture.

 

[TOBY458]

I would suggest buying one of the new Sako 90 rifles. They reworked the action on those to eliminate the ejection issues that some of the 85 rifles had

 

[pmangelos]

I'm a huge Sako fan, I own about 8 of them but the ejection is a real issue on the 85 models. There are heavy extractor springs that have helped some people, and as mentioned the scope turrets often are hit by the ejecting shell causing the jamming so choosing a scope with smaller turrets or higher rings may help. The Sako 90 does have a new ejection system but it is a push feed design as opposed to the controlled feed design of the 85 so take that into consideration.

 

[Longwalker]

Not all M85's are affected. You may ask to try the rifle first and see at what angle it kicks empties out. I have owned four, and had a problem with two of them. I asked a skilled machinist to build me new extractors. Less clearance between bolt face and extractor claw solves the problem if it exists. Both my .375 and my 7x64 eject perfectly horizontal now.