Original .460 Smith and Wesson Reloading Data

Forrest Halley

AH legend
Joined
Jul 28, 2019
Messages
2,295
Reaction score
4,703
Location
VA, USA
Media
29
I finally found it using the way back machine!

Some have in the past questioned me with my use of 52.0 gr of Win 296 under a 200 gr .452 FTX bullet in this cartridge. I had the data on a printout, but lost it in a move some years ago.

The link solely for research purposes: "http://www.hornady.com/assets/files/ftx_load_data/460_sw_magnum_ftx.pdf"
It has since been castrated by a bit...lawyers...:E Nono:
Here it is for all the doubters and fellow enthusiasts:
1000010746.png
 

Attachments

I had MGM cut a 20” .460 barrel for an Encore. I assume it was shooting 300 grain A frames at about 2200 FPS out of 6lb rifle. It was the most god awful violent recoiling rifle ever. Made 3” rifled 12 gauge slugs enjoyable.
 
I had MGM cut a 20” .460 barrel for an Encore. I assume it was shooting 300 grain A frames at about 2200 FPS out of 6lb rifle. It was the most god awful violent recoiling rifle ever. Made 3” rifled 12 gauge slugs enjoyable.
The Advent of the .450 bushmaster did lots of good things for .460 S&W carbines. The extra barrel length was causing hellacious blown up bullets on whitetails and hogs. Bullets were designed to be shot out of an 8" barrel revolver not a 20+" carbine. However the gun is amazing. I like the super fast recoil of my .375H&H Encore. It's a lightweight high performer.
 
I finally found it using the way back machine!

Some have in the past questioned me with my use of 52.0 gr of Win 296 under a 200 gr .452 FTX bullet in this cartridge. I had the data on a printout, but lost it in a move some years ago.

The link solely for research purposes: "http://www.hornady.com/assets/files/ftx_load_data/460_sw_magnum_ftx.pdf"
It has since been castrated by a bit...lawyers...:E Nono:
Here it is for all the doubters and fellow enthusiasts:
View attachment 600719
Forrest, other than the deletion of Scott 4100, replaced by a different load of Acurrate 4100, those loads are the same as in the present Hornady 11th edition manual. They also added a Power Pro 300 load.
 
Forrest, other than the deletion of Scott 4100, replaced by a different load of Acurrate 4100, those loads are the same as in the present Hornady 11th edition manual. They also added a Power Pro 300 load.
Duly noted! Thank you! In comparison from the hodgdon online data, 46.5 is the maximum listed for said bullet with H110. I found that to be quite interesting. Is it still listing a large rifle primer or has that been upgraded to a LRM?
 
Duly noted! Thank you! In comparison from the hodgdon online data, 46.5 is the maximum listed for said bullet with H110. I found that to be quite interesting. Is it still listing a large rifle primer or has that been upgraded to a LRM?
They list the Winchester Large Rifle primer.
 

Forum statistics

Threads
67,963
Messages
1,510,873
Members
149,152
Latest member
grandtekauto
 

 

 

Latest profile posts

Zim Fan wrote on Charlie64's profile.
You might have edited your post on the PH in the Bubye. I know the PH and is a wonderful person and a fmaily man and runs a succesful business in Zim and just doesn't want the attention that the internet offers, the ugly kind.
Andrew62 wrote on Imac45acp's profile.
Hello,

Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.

Thank you for your time,

Andrew
1r4rc wrote on Corylax18's profile.
Saw your post. Nice. Denver too. Genesee area (just off 70) if ever up this way. Alternatively, do you have a membership at GGC? Whatever, you'll have a wonderful time in Africa. Enjoy.
'68boy wrote on UNTAMED KNIVES's profile.
Did you get my info? I sent name and requested info today. Want to make sure you received it. I don’t need any serial number etc
Leaner professional hunter
 
Top