New Buffalo Bore loads

How would a 500gr .510 @2000-2100fps go for buff or elephant?
Too slow and too light. Either speed it up or use a heavier bullet.
 
Too slow and too light. Either speed it up or use a heavier bullet.
:rolleyes:

Noop …. Neither.

Back in its heyday, Jeffrey’s .404 with a 400grn/423-dia bullet at 2050-2100fps (original velocities) accounted for more dead elephants and other dead large DG than its faster contemporaries in the 400-class (e.g., 416 Rigby).

Shot-placement matters …. but more weight, and certainly more velocity, won’t kill an elephant any better. It’s unnecessary.
 
Cheers.

The SD is sub .3 (.275) vs the 400gr .404 jeffery with its .321.
I guess the answer would just be go monolithics that seem to punch through everything and almost make SD redundant. Eh it’s hypothetical anyway - I won’t be hunting africa
 
:rolleyes:

Noop …. Neither.

Back in its heyday, Jeffrey’s .404 with a 400grn/423-dia bullet at 2050-2100fps (original velocities) accounted for more dead elephants and other dead large DG than its faster contemporaries in the 400-class (e.g., 416 Rigby).

Shot-placement matters …. but more weight, and certainly more velocity, won’t kill an elephant any better. It’s unnecessary.
Yeah the Jeffery has crept up a fair bit now. Even the 375 H&H is above original proven to work ballistics. Would be great to test actual velocity vs listed velocity on these original loadings - they didn’t have chronographs in 191X (or did they?)
 
They used a pendulum prior to the chronograph coming of age , no?
 
:rolleyes:

Noop …. Neither.

Back in its heyday, Jeffrey’s .404 with a 400grn/423-dia bullet at 2050-2100fps (original velocities) accounted for more dead elephants and other dead large DG than its faster contemporaries in the 400-class (e.g., 416 Rigby).

Shot-placement matters …. but more weight, and certainly more velocity, won’t kill an elephant any better. It’s unnecessary.
My opinion was asked for and I gave it.

You have a different opinion, and that's fine. I am not so rude as to roll my eyes at you or insist that you are wrong.
 
Last edited:
Really cool .. nice 500
1708505254666.png
 

Forum statistics

Threads
64,494
Messages
1,420,317
Members
130,684
Latest member
EdenS11871
 

 

 

Latest posts

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top